E01
\807533
1
CORGHI Assembly winder mod.BE234-200-36 yoc 1996, 24
heads, traverse 8", 3 ends, 1 splicer, single counter
meter for all 24 heads, manual doffing.
1 CORGHI
Assembly winder mod.BE234-200-36 yoc 1997, 12 heads,
traverse 8", 3 ends, splicer, counter meter each head,
manual doffing.
E01
\811663
1
FADIS Assembly winder mod.FA yoc 1982, 30 heads, creel 4
ends, 8", tube lenght 230 mm., int.dia.56 mm.
E01
\812487
1 FADIS Assembly winder mod.TUAN BS yoc
1989, 42 heads, 2 ends, 8"cylind., oiling device,
countermeter each head.
E01
\812629
2
CORGHI Assembly winders yoc 2000, 21 heads, 8", manual
doffing.
E01
\812657
1
FADIS Assembly winder, mod. TUAN B, yoc 1989, 32 heads,
traverse 8" cylind., 2 ends, countermeter each head,
creel under machine.
E01
\813261
1
BODEGA Assembly winder, mod. BOAC 100, yoc 1990,
reconditioned in 2000, 15 heads, tube 270 mm., run 250
mm., diam. 57 mm., 3 ends, creel, autodoffing,
electronic countermeter.
E01
\813873
1
RITE Assembly winder, mod. AERL, yoc 1995, 48 heads, 3
ends, tube length 225 mm. x diam. 43 mm.,
autodoffing.
E01
\814358
1 RITE Assembly winder, mod. AERL, yoc
1997, 36 heads, 8", internal creel, 2 ends,
autodoffing.
1 RITE Assembly winder, mod. AERL, yoc
1995, 24 heads, 8", external creel, 4 ends.
E01
\814586
1
FADIS Assembly winder, mod. TUAN BE, yoc 1994, 30 heads,
2 ends, 8" cylind., splicer each 2 heads, manual
doffing.
E01
\814734
7
HAMEL SAURER Assembly winder type HDW, 30 spindles,
creel 2 ends, flanged bobbin flange base 130 mm., run
250 mm. or flange base 119 mm., run 280 mm.
E01
\814979
1
FADIS Assembly winder mod.B/E yoc 1995, 30 heads of
which (18) heads with creel at 2 ends and (12) with
creel at 3 ends, single countermeter or divisible in
sections.
E01
\816340
1
SSM Assembly winder, type DP1 D, yoc 1999, 60
heads,
8”/10", 4 ends, oiling device, 2
creels, 2 blowers, autodoffing
E01
\816341
1
SSM Assembly winder, type DP-Y, yoc 1999, 60 heads, 3 headings, 1
creel, 1 blower each section of 20 heads, 3 aspiration
blocks, autodoffing, conveyor belt
E01
\816345
1
FADIS Assembly winder mod.TUAN B-E yoc 1994, 24 heads, 2
ends, 8", electronic countermeter each head.
E01
\816346
3
CORGHI Assembly winders mod.BE/234 yoc 1995/1996, 24
heads 1 side, 7" cylind., electronic meter counters at
single setting, (2) machines with 3 ends and (1) machine
with 2 ends.
E01
\816372
1
RITE Assembly winder, mod. ARD-L. yoc 2001, 12
heads, 8", autodoffing, countermeter, Finea sensors,
external creel sensors for 12 ends.
1 VOLKMANN 2x1
Twister, mod. VTS07.5, yoc 1996, 80 spindles, feeding 8"
or cylind., can dia.190 mm., delivery 6", 4°20, Bauart
5.10, inverter, blower, waxer.
E02
\809828
1
SCHLAFHORST Cone winder, mod. GKTX 138, yoc 1980, 32 heads,
delivery 8", 3°30, 1 trolley each 8 heads, fishing
knotter, Y feeder, Uster MK31 clearers.
E02
\811529
3 MURATEC Cone winders, mod. MACH CONER
7-II, yoc 1994, 40 heads, delivery 6", 4°20, waxer,
inverter on single head, Loepfe 800 clearers, G2Z
splicer, Electro-jet blower each machine.
E02
\811585
2
SCHLAFHORST Cone winders, mod. 238, yoc 1992, 24 heads
each, delivery 6", 5°57, Schlafhorst splicer, waxer,
Uster D5 clearers, 1 feeder.
1 SCHLAFHORST Cone
winder, mod. 238, yoc 1990, 20 heads, delivery 6", 5°57,
Schlafhorst splicer, waxer, Uster D5 clearers, 1
feeder
E02
\812438
1
SCHLAFHORST Cone winder, mod. 238 DX, yoc 1988, 40
heads, delivery 6", 5°57, waxer, splicer, Uster
Polymatic 15 clearers.
E02
\813149
1
SCHLAFHORST Cone winder, mod. AC 338-D/20, yoc 2000, 20
heads, delivery 6", 4°20, Loepfe YarnMaster 800 I
clearers, thermo-splicer, feeding tube 360 mm., waxer,
380 Volts.
E02
\813274
1
SCHLAFHORST Cone winder, mod. 238 D SYSTEM yoc 1996, 40
heads, delivery 4"Soleil, Uster Polimatic clearers,
splicer.
E02
\813517
2 SCHLAFHORST Cone winders, mod. 238,
type 147, yoc 1995, 40 heads, delivery 6"
cylind/4°20, Caddy autom. feeder, (1) Loepfe Yarn Master
800 TK-740 clearers and (1) Uster Quantum clearers, with
waxer.
E02
\813976
1
SCHLAFHORST Cone winder, mod. 238/147, yoc 1997, 30
heads, 6", 5°57 thermosplicer, Uster Polymatic MK-C15
clearers, with caddy for transport of tubes.
1
SCHLAFHORST Cone winder, mod. 238/146, yoc 1991, 30
heads, 6", 4°20,
thermosplicer, Uster MK-C15-AC clearers, with
belt for transport of tubes.
E02
\813988
1
SAVIO Cone winder, mod. ESPERO, yoc 1996, 36 heads,
delivery 6", 5°57, waxer, splicer, Uster KW20 clearers,
manual feeder, feeding tube 350 mm., 2 autodoffing
trolleys, inverter, with fishing knotter.
The same
machine, but sold with splicer instead of fishing
knotter
E02
\814130
1
SCHLAFHORST AUTOCONER, mod. 338 D, yoc 2001, 30 heads,
6", feeding from tubes 350 mm., thermosplicer, Loepfe
TK940 clearers, waxer, autom. feeder.
E02
\814386
1 MURATA Cone winder mod.7-V yoc 1995, 30
heads (20+10), 2 feeders, delivery 6", 5°57, splicer,
Peyer 551 clearers, Magitex blower, feeding tube 350
mm., 1 autodoffing trolley
E02
\814436
1
KARL MAYER Cone winder mod.RC-10 NG yoc 1985 about, 12
heads, delivery 10" (lenght 270 mm. x dia.75 mm.x 33
mm.), Y feeding tubes 600 mm., splicer, Uster MK46
clearers, 1 piece carriage, blower.
E02
\814701
3
SCHLAFHORST Cone winders for linen mod.238 type 147 yoc
1992/93, 30 heads each, autom. bobbins preparations type
System 6", 4°20, steel drum at 2 crossings, Loepfe
Yarnmaster clearers TK740, water splicer.
Machines
equipped with all options to work linen
E02
\815045
1 SAVIO cone winder mod.ESPERO yoc 1997,
48 heads, delivery 6", 5°57, autodoffer, autodoffing,
Mesdan splicer, Uster clearers UPC, Magitex
blower.
E02
\815240
1 SCHLAFHORST cone winder, type 238DX
146, yoc
1991, 50 heads, delivery 6" 4°20, waxer, LOPFE TK930H
clearers, splicer, auto doffing, MAGITEX blower.
E02
\815282
1
SCHLAFHORST Cone winder mod.AUTOCONER 338-D, yoc 2002,
10 heads each, delivery 6”, 5°57, thermosplicer, Loepfe
clearers YM-900 TK-940 ZENIT F, waxer, autom.feeder,
autodoffing, with optical clearers detector for foreign
fibers ZENIT.
E02
\815391
1
SCHLAFHORST Cone winder mod.238-DX yoc 1991, 30 heads,
delivery 6", 5°57, autom. feeder, splicer, Uster D5
clearers, waxer.
E02
\815705
2
SCHLAFHORST Cone winders mod.238 SYSTEM for flax,
automatic, yoc 1993, 30 heads, waxer, delivery 6", 4°20,
Acquasplicer, Loepfe TK 740 clearers, 1 autodoffing
trolley.
E02
\815938
6
SAVIO Cone winders mod.ESPERO E yoc 1997, 16 heads,
delivery 6", 5°57, waxer, splicer, Loepfe TK840
clearers, autodoffer.
E02
\815990
4
SAVIO ESPERO Cone winders yoc 1990, 32 heads, autom.
feeder, Uster Polymatic, Uster MK C15 A2
clearers.
E02
\815999
1 SAVIO ESPERO E Cone winder yoc 1998, 28
heads, autodoffing, Magitex blower, Loepfe 930F
clearers, twin-splicer.
E02
\816015
1
SCHLAFHORST Cone winder mod.238 yoc 1996, 40 heads,
delivery 6", 4°20, thermosplicer, Keisokki clearers,
autodoffing, waxer.
E02
\816046
1 SCHLAFHORST Cone winder mod.338 yoc
2005, 30 heads, delivery 6", 4°20, thermosplicer, Loepfe
clearers, waxer.
E02
\816360
2
SCHLAFHORST cone winders mod.GKT yoc 1980 about, 24
heads, delivery 8", fishing knotter, Loepfe FR600
clearers.
E03
\810708
2 SCHARER Cone to cone precision winders
yoc 1987, 24 heads, 6"cylind., feeding from cones,
autodoffing.
E03
\814229
2
SAVIO Cone to cone winding machines mod.ESPERO I yoc
1998, 24 heads, delivery 6", 4°20/5°57, Mesdan 492/3
aquasplicers (or standard splicer twin Savio), Uster
UPC200 clearers, waxer, manual feeder.
E03
\814417
1
SCHLAFHORST Cone to cone winding machine, mod.
AC-238RM-E, yoc 1993, 40 heads, tube 10", 1°50, clearer
yarn system Loepfe Yarnmaster 800 TK 770, with
thermosplicer.
E03
\814599
1 SAVIO Cone to cone winding machine
mod.ESPERO yoc 1996, 40 heads, delivery 6", 4°20,
splicer 490L, autodoffing, Peyer 551, waxer.
E03
\814888
1 SAVIO Cone to cone winding machine
mod.ESPERO LR 4, 56 heads of which:
32 heads yoc
1996.
24 heads yoc 2003.
delivery 6", 4°20, Mesdan
water splicer type 4923, Loepfe clearers type TK 830
N.
2 Autodoffing trolleys.
autom. bobbin feeding
at "S"
No waxer.
Magitex blower.
E03
\814949
4 SCHLAFHORST Autom. Cone to cone
winders, 50 heads, delivery 6", 5°57, splicer, waxer.
E03
\815880
10
MURATA Cone to cone winding machines MACH CONER 7-5 yoc
2000, 40 heads, 6", 4°20, Uster Quantum clearers, waxer
with sensors, splicer D4 or G2Z, blower.
E03
\815996
3
SAVIO ORION LR Cone to cone winding machines yoc
2003-2004-2005, 56 heads, drums 2 crossings 6", 4°20 and
cylind., 2 autodoffing trolleys, Mesdan 4924 E
acquasplicer, of which:
1 machine yoc 2003 clearers
Loepfe 940 FM.
1 machine yoc 2004 clearers
Loepfe-Zenit.
1 machine yoc 2005 clearers Loepfe 930
SN.
E03
\815997
1 SAVIO ESPERO Cone to cone winding
machine yoc 1999, 56 heads, 6", 4°20 and cylind.,
autodoffing, Loepfe 930S clearers, Mesdan 4923
acquasplicer.
E04
\815665
4
Hank winding machinefor silk yoc 2007, 120
heads each.
E04
\816088
1
Electronic hank-to-cone winder CORGHI Mod.ICL
- n.24
heads – with slow start
- pitch 6" (152 mm.) -
conicity 5°57‘
- Swift 340 mm.
- complete with
waxing device
- mechanical clearers
- feeder New
type
- Year 1997.
E04
\816089
1 Mechanical Hank-to-cone cone-to-cone
winder SAVIO
- n.45 heads - Aluminium head
- Swift
280 mm.
- Pitch 6” (152 mm.) - conicity 5°57’
-
waxing device
- year 1980
E05
\813249
4
OMR Winders, type MDTC for sewing threads, year 1999, 3
heads, tube length 115 mm., conical, top diam. 30 mm.,
base diam. 37 mm.,
E05
\816281
1
HACOBA P/2 Winder mod.H1200 yoc 1990, 12 heads, tube
lenght 117 mm. x dia.35 mm. x 18 mm.
E06
\814950
3
SAVIO Manual Cone winders, 96 heads, delivery 6", 5°57,
waxer.
2 SAVIO Manual Cone winders, 40 heads,
delivery 6", 5°57, waxer.
1 SAVIO Manual Cone winder,
80 heads, delivery 6", 5°57, waxer.
E07
\808937
2
KARL MAYER Cone winders mod.RC/8S yoc 1985, for silk
yarns, 30 spindles, tube lenght 230 mm., dia.56 mm.,
without electronic clearers.
1 KARL MAYER Cone winder
mod.RC/8S yoc 1985, for silk yarns, 60 spindles, tube
lenght 230 mm., dia.56 mm., without clearers.
E07
\810063
1
Fadis Assembly winder, type RPS, yoc 1996. N 28 heads
(14x2), assembly max 4 ends, electronic stop,
creel for large cones, output on 4 LBS flanged bobbins
run 200 mm. flange dia. 120 mm., 2 Mes-dan
knotters.
E07
\815420
1 SSM DIGICON Precision winder mod.MDF
400 yoc
1995 about, 48 heads, delivery 6" 4°20, autodoffing.
E07
\815453
1
FADIS Precision winder mod.FAST/RE yoc 1997, 6 heads,
delivery cylind. tube lenght 225 mm. x dia.56 mm.,
countermeter, oiling device, autodoffing.
E07
\815595
1
SSM DIGICONE Precision winder, type MDF, 24 heads,
cylind. tube 230 mm.
E07
\816300
1
SSM Precision winder type PRECIFLEX PW2, yoc 2008, 60
spindles, take up tube length 230 mm. x diam 84 mm.
E09
\813525
6
SAVIO Ring Twisters, mod. FF301, yoc 1970/72
about, modified and updated in 1988 as Assembly Twisters
2 ends, of which:
*(4) 480 spindles each, single
drive, ring diam. 65 mm., gauge 90 mm., tube 320
mm.
*(2) 588 spindles each, single drive, ring
diam.56 mm., gauge 80 mm., tube 300 mm.
E11
\808133
1
Twisting plant composed of:
-1 BODEGA Assembly winder
yoc 1994, 48 heads, traverse 8" cylind.,
autodoffing.
-1 CAIPO Assembly winder
yoc 1999, 39 heads, traverse 8", independent heads,
autodoffing.
-2 SAVIO 2x1 twisters mod.TDS-15 yoc
1980, (1) 180 spindles, (1) 220 spindles, input 8",
output 6", 4°20, manual air threading.
-2 SAVIO 2x1
twisters mod.TDS-15N yoc 1982, 220 spindles, input 8",
output 4°20, with pneumatic air threading device.
-1
SAVIO 2X1 twister mod.TDS-15NR yoc 1984, 220 spindles,
input 8"-12" Soleil, output 6", 4°20, with pneumatic air
threading device.
-1 SAVIO 2X1 twister mod.TDS-15N
yoc 1991, 220 spindles, input 8", output 6", 5°57, with
pneumatic air threading device, no inverter.
-All
machines with blower and inverter.
-1 Weighing
system.
-1 HYSTER Electric forklift, 15 q.
-50
trolleys in alluminium.
E11
\808291
1 SAVIO 2x1 Twister mod.GEMINIS 242-BF
yoc 1999, double drive, independent sides, 180 spindles,
free ballon, input 8", ext. dia.155 mm., tube lenght 225
mm., int. dia.44 mm., delivery 6", 4°20, Magitex blower,
180 additional cans type 2A, input 7".
-1 SAVIO 2x1
Twister mod.GEMINIS 228-F yoc 1988, 190 spindles, input
8", ext. dia.155 mm., delivery 6", 4°20.
-1 SAVIO
Assembly winder mod.AES yoc 1986, 32 heads, 4 ends, with
2 splicers.
E11
\810810
1
SAVIO GEMINIS 2x1 Twisters, mod. 242 BF, yoc 2000, 260
spindles, double drive, gauge 240 mm., free ballon, can
dia.175 mm., feeding tube 230x60 mm., take up 170 mm.,
4°20/5°57, waxer, blower, inverter, pneumatic air
threading device.
E11
\811662
3
SAVIO 2x1 Twisters, mod. GEMINIS 243C, yoc 1998, 200
spindles, can h.12" x dia.200 mm., feeding 6"cylind.,
delivery 6" 4°20 /5°57 or cylind., splicer (2 each
side), 1 machine with 1 flyer on 1 side, waxer.
With
pneumatic package lifting.
With Magitex
blower
With changing of twists by gear.
With
changing of speed by inverter.
With device Z/Z to
control twisted yarn quality and eliminate
faults.
380 Volts/50 Hz/3ph.
3 SAVIO 2x1 Twisters
mod. GEMINIS 243C, yoc 1997, 200 spindles, can h.12" x
dia.200 mm., feeding 6"cylind., delivery 6" 4°20 /5°57
or cylind., splicer (2 each side), 1 machine with 1
flyer on 1 side, waxer.
With pneumatic package
lifting.
With Magitex blower
With changing of
twists by gear.
With changing of speed by
inverter.
With device Z/Z to control twisted yarn
quality and eliminate faults.
380 Volts/50 Hz/3ph.
E11
\812247
3
SAVIO 2x1 Twisters, mod. TDS 15N, yoc 1985, 240
spindles, feeding 4"x2 Soleil or 8"cylind., can dia.160
mm., delivery 6", 4°20, without splicer, without
blower.
5 SAVIO 2x1 Twisters mod.TDS 15N yoc (1) 1984
and (4) 1991, 240 spindles, feeding 4"x2 Soleil, can
dia.160 mm, delivery 6", 4°20, without splicer, 1
Electrojet blower for 2 machines.
E11
\812755
1
SAVIO 2x1 Twister mod.TDS-228F yoc 1988, 190 spindles,
free ballon, input tubes gauge 178 mm., (lenght 196 mm.
x dia.56 mm.) output 6", 4°20, pneumatic air threading
device, Magitex blower.
*1 SAVIO 2x1 Twister
mod.TDS-190M yoc 1981, controlled ballon, 228 spindles,
input tubes gauge 200 mm. (lenght 230 mm. x dia.56 mm.),
output 6", 4°20, manual air threading device, inverter,
Magitex blower.
E11
\812878
*6
SAVIO 2x1 Twisters mod.GEMINIS 202Byoc (4) 1998 and (2)
1999, 360 spindles, can dia.170 mm., input 8", output
6", 4°20, Magitex blower, pneumatic air threading
device, inverter, 1 machine with waxer.
*3 RITE
Assembly winders yoc (2) 1998 and (1) 1999, 44 heads, Mesdan
acquasplicer, autodoffing, Uster C3 clearers, 2 machines
with 2 ends, 1 machine with 3 ends, delivery 8", Magitex
blower.
E11
\813063
4 SAVIO 2x1 Twisters yoc 1984/82 of
which:
(1) mod.TDS-15N, 210 spindles, with air
threading device.
(3) mod.TDS-212, (2) with 220
spindles and (1) with 200 spindles, with inverter,
without air threading device.
gauge 212 mm., feeding
8" cylind., delivery 6", 4°20, 2 machines with waxer.
E11
\813234
3
SAVIO 2x1 Twisters mod.GEMINIS 240C yoc (1) 1997, (1)
1998 and (1) 1999, double drive, 200 spindles, feeding
8"cylind.x dia.43 mm., delivery 6", 4°20, with pneumatic
package lifting, with Magitex blower, without continuous
twist variator, without inverter spindle speed control,
without twist Master, 380 Volts/50 Hz/3ph.
Also
available:
1 OBEM Steamer with electric boiler, 30
kw., 2 trolleys, total capacity 400 kgs.
-1 BODEGA PN
Assembly winder mod. BOAC-100 yoc 1995, 78 heads (39x2),
8" except 9 heads 10", creel 3 ends.
-1 BODEGA CAIPO
Assembly winder yoc 1998, 12 heads (1 side), 8", creel 4
ends.
E11
\813714
1
SAVIO 2x1 Twisters mod.GEMINIS 204B DUOPOT yoc 1996, 144
spindles (72x2), feeding 4"x2 Soleil, delivery 6",
4°20.
E11
\813872
2 SAVIO 2x1 Twisters, mod. TDS-15, yoc
1984, 200 spindles, feeding 8", delivery 6",
5°57/4°20.
E11
\814017
2
SAVIO 2x1 Twisters, mod. TDS-190M, yoc 1980, 372
spindles, input 8" cylind., can dia.166 mm., delivery
6", 4°20, Magitex blower, 2 machines with waxer on 1
side.
1 SAVIO GEMINIS 2x1 Twister, mod. 242C, yoc
1997, 300 spindles, input 8", can dia.205 mm., delivery
6", 4°20, waxer on 1 side, blower, inverter.
E11
\814415
3
SAVIO 2x1 Twisters, mod. GEMINIS 202 B, 264 spindles,
yoc 2001, feeding 4"x2 Soleil and 8" cylind. flyer,
delivery 6", 4°20, S/Z, Magitex blower, inverter.
E11
\814732
1
SAVIO 2x1 Twister mod.TDS 228 yoc 1985, 110 spindles
(55x2), independent sides, input 8" cylind., delivery
6", waxer, pneumatic air threading, blower.
E11
\814789
7
SAVIO 2x1 Twisters, mod. TDS 17N, yoc 1984-86-88,
reconditioned on 2008, 176 spindles each, alim.8", free
ballon, delivery 6" 4°20, gauge 265 mm.
2 machines
with waxer.
1 Magitex blower each machine.
4
machines with pneumatic air threading device and 3
machines without it.
E11
\814863
3
SAVIO 2x1 Twisters mod.TDS 190 M yoc 1986/87, 348
spindles, feeding 8", can dia.165 mm., delivery 6",
4°20, air threading device, blower.
E11
\815020
4
SAVIO 2x1 Twisters mod.GEMINIS 243 C yoc 1995, 220
spindles, feeding 6x2 Biko, delivery 6", 1°51, can
dia.220 mm., with Magitex blower.
2 SAVIO 2x1
Twisters mod.GEMINIS 243 C yoc 2002, 220 spindles,
feeding 6x2 Biko, delivery 6", 1°51, can dia.220 mm.,
with Magitex blower.
2 SAVIO 2x1 Twisters mod.GEMINIS
243 C yoc 2001, 300 spindles, feeding 6x2 Biko, delivery
6", 1°51, can dia.220 mm., with Magitex blower.
E11
\816155
1
SAVIO Assembling machine type AES 12 yoc 1997, 24
spindles.
2 SAVIO 2x1 Twisters mod.GEMINIS 202 B, yoc
1997, 216 spindles (108x2)
E11
\816342
1
SAVIO 2x1 Twister mod.GEMINIS 202.B yoc 2001, single
drive, 216 spindles, pneumatic air threading device,
feeding 8", delivery 6", 4°20.
E11
\816343
1 SAVIO 2x1 Twister mod.TDS-212 yoc 1976,
200 spindles, feeding 8", delivery 6", 4°20, manual air
threading device.
E11
\816344
3
SAVIO 2x1 Twister mod.TDS-15N yoc 1989, 200 spindles,
feeding 8", delivery 6", 4°20, of which:
1 with
inverter and with blower.
1 with inverter without
blower.
1 without inverter with blower.
E12
\811777
2
VOLKMANN 2x1 Twisters, mod. VTS-07, yoc 1994, 208
spindles (104x2), feeding 10"cylind. or 2x6" Soleil with
adapter, delivery 6", 5°57, air threading device, (1) waxer.
-1
BODEGA Assembly winder, yoc 1994, 36 heads (1 side),
10"cylind., 3 ends, autodoffing, with creel.
E12
\812589
2
VOLKMANN 2x1 Twisters, mod. VTS-08, yoc 1988, single
drive, 196 spindles (98x2), feeding 7"/possible 8", pot
dia.160 mm., delivery 6" (170 mm.), 4°20, air threading
device.
E12
\814234
1
VOLKMANN 2x1 Twister, mod. VTS07.5, yoc 1996, 80
spindles, feeding 8" or cylind., can dia.190 mm.,
delivery 6", 4°20, Bauart 5.10, inverter, blower,
waxer.
1 RITE Assembly winder, mod. ARD-L. yoc 2001, 12
heads, 8", autodoffing, countermeter, Finea sensors,
external creel sensors for 12 ends.
E12
\815363
1
VOLKMANN 2x1 Twister mod.VTS-05.5.02 yoc 1998, 50
spindles (25x2), independent sides, feeding 290 mm. x
dia.56 mm., delivery 290 mm.x44x73 mm., 4°20, air
threading device.
1 VOLKMANN 2x1 Twister
mod.VTS-05.5.03 yoc 2003, 50 spindles (25x2),
independent sides, feeding 290 mm.x dia.56 mm., delivery
290 mm. x dia.73 mm., 4°20, air threading device.
E12
\815473
1
VOLKMANN 2x1 twister, type VTS-07, yoc
1992, 288 spindles, feeding 4"x2 Soleil, delivery 6"
4°20 Biko, double drive, ZZ inverter.
E12
\816025
1
VOLKMANN 2x1 Twister mod.VTS-07 yoc 2000, 272 spindles,
two drive, inverter, feeding 8" (tube 200 mm., run 185
mm.), delivery 6", 4°20, Magitex blower.
E12
\816321
1 MURATA 2x1 Twister yoc 2001, 180
spindles, can dia.180 mm., feeding 8", delivery 6",
4°20, pneumatic air threading device, single
motor.
E12
\816339
4 VOLKMANN 2x1 Twisters mod.VTS-08
6.10, yoc
2000, 180 spindles, feeding 8" max diam. 163 mm.,
delivery 6", 4°20, pneumatic air threading device,
blower
E13
\811528
4
MURATEC 2X1 Twisters, mod. 368, yoc 1994, 192 spindles
(96x2), feeding 7", delivery 6", 4°20, can dia.190 mm.,
inverter, countermeter, pneumatic air threading device,
free ballon, Electro-jet blower each machine.
-2
BODEGA Assembly winders, mod. BOAC 100/A, yoc 1995, 30
heads, 2 ends, 7" (cone dia.48 mm. x 197 mm.),
autodoffing, double inverter, countermeter, Mesdan
splicer, pneumatic air threading.
1 Electro-jet
blower.
E14
\814556
1
VERDOL 2x1 Twister yoc 1985, 48 spindles (24x2), feeding
cylind. tube 270 mm., dia.76 mm, take up 10", 270 mm.,
dia.37 x 75 mm., gauge 600 mm., paraballon 470 mm., can
320 mm., Magitex blower yoc 1997.
E14
\814620
3 HAMEL SAURER Twisters type 2020 yoc (2)
1991 and (1) 1994, 214 spindles, flanged bobbins dia.135
mm., take up 6".
E14
\814733
11 HAMEL SAURER Twisters type ET 240 yoc
1999/2000/2001, 240 spindles, flanged bobbins dia.135
mm., take up 6".
E14
\815548
2
HAMEL 2x1 Twisters, type 2020E, yoc 1996, 216 spindles
for bobbin diam. 130 mm., traverse 250 mm., take-up tube
170 mm. interior diam. 54 mm., equipped for conical
take-up and with 432 bobbins each machines.
E15
\808518
2
LEZZENI Fancy twister mod.TF/ds yoc 1980, 200 spindles
(100x2), ring diam. 90 mm., tube 450 mm., friction
drive, Sampre draft system.
E15
\808622
4
RPR FANTASY Hollow spindle fancy twisters mod. PR2, yoc
1985 about, 80 spindles, mechanical digital drive.
2
RPR FANTASY Hollow spindle fancy twisters, mod. PR2, yoc
1985 about, 80 spindles, electronic drive.
E15
\809815
2
BIGAGLI fancy yarn twisting machines, type NOVAFIL
BR/400 T1, yoc1995, 300 (150 x 2 sides) spindles each
machine,
Ring diam. 90 mm, gauge 120 mm, tube 450
mm.
Sold with:
-1 BIGAGLI Cone winder, type BBC,
yoc 1995, 24 heads (12x2), cones, tubes and spare
parts.
E15
\810788
2
LEZZENI Fancy Twisters, mod. TF/ds, yoc 1982, at
friction, 200 spindles (100x2), ring dia.90 mm., tube
450 mm., mechanical system.
E15
\810790
2 PAFA Fancy twisters, mod. EXPO 90, yoc
(1) 1982 - (1)1983, 42 spindles, 6", 4°20.
E15
\810941
1
LEZZENI Hollow spindle fancy twister, mod. FTF-DS-L, yoc
2000, sliver feeding, 128 spindles (1 side), gauge 240
mm., ring dia.115 mm., tube 450 mm., 1 draft
system.
E15
\811068
1 PAFA Fancy Twister, mod. EXPO 90, yoc
1983, 24 spindles, delivery cone 10", 2 colours.
1
PAFA Rewinder, 12 spindles.
E15
\811146
2
PAFA Fancy twisters, mod. LEGAFIL S200-R, yoc 2001-2002,
(1) 40 heads, (1) 36 heads, double hollow spindle, 2
draft systems, take up tube 8", tronco-conical
E15
\812614
1
PAFA Fancy Twister, mod. EXPO 90, yoc 1986, 30 spindles,
output 8", 2 drafting systems, electronic headed.
E15
\814557
1
PAFA Fancy Twister, mod. EXPO 90, yoc 1983, 24 heads,
delivery 10", 2 colours.
1 PAFA Fancy Twister, mod.
EXPO 90, yoc 1984, 30 heads, delivery 10", 2
colours.
1 PAFA Fancy Twister, mod. EXPO 90, yoc
1987, 12 heads, delivery 10", 2 colours.
E15
\814695
1
LEZZENI Fancy Twister mod.TF/DS yoc 1996, 240 broches,
ring dia.114 mm., gauge 150 mm., tube 450 mm., 500
flanged bobbins.
E15
\814696
1 LEZZENI Fancy Twister mod.TF/DS yoc
2000, 240 broches, ring dia.114 mm., gauge 150 mm., tube
450 mm., with inverter, 550 flanged bobbins.
E15
\814697
1
GIGLIOTTI & GUALCHIERI Fancy Twister mod.FANTAFILO
yoc 2000, 150 spindles, ring dia.90 mm., tube 450 mm.,
n°400 flanged bobbins.
1 Rewinder for flanged bobbins
GIGLIOTTI & GUALCHIERI, 24 heads.
E15
\814774
2
PAFA Fancy Twisters, mod. LEGAFIL, yoc 1983, 104
spindles, ring dia.114 mm., tube 450 mm.
E15
\815287
2 LEZZENI Fancy Twisters, mod. TF/ds, yoc
1981 and 1987, 160 spindles (80x2), ring dia.114 mm.,
tube 450 mm., with PC, no frictions, motors
brushless.
E15
\815667
3
SAURER ALLMA Hollow spindle fancy twister machines of
which:
1 mod.ESP-X yoc 1981.
2 mod.ESP-S yoc 1982
and 1984
All with 48 spindles, feeding from roving
and yarn, delivery 6" (152 mm.), 4°20, electric panel
modified in 2002 with installation of 4 Inverters and
PLC.
E15
\815739
5
PAFA Hollow spindle fancy twisters, mod. LEGAFIL S, yoc 1988-90, 152
spindles each, feeding cans and bobbins, feeding from
roving and yarn, simple drafting system, tube 450 mm.,
ring diam. (1) 115 mm. – (3) 90 mm., gauge 150 mm.,
progammator with PLG COAX, bruschlers motors.
E15
\815740
1
PAFA Hollow spindle fancy twister, mod. LEGAFIL S, yoc 1990, 104
spindles, feeding cans and bobbins, feeding from roving
and yarn, double drafting system, tube 450 mm., ring
diam. 110 mm., gauge 150 mm.
E15
\815741
1
SAURER ALLMA Hollow spindle fancy twister, ESP-X, yoc 1984, hollow
spindle, 32
spindles, feeding from roving and yarn, SKF draft,
delivery 8" (200 mm.) x 4°20, electric panel modified in
2002 with installation of 4 Inverters and PLC, MAGITEX
blower.
E15
\816322
2
BIGAGLI Fancy twisting machines NOVAFIL BR-400 yoc 1995,
360 spindles each (180x2), ring dia.90 mm., tube 450
mm., sold with:
1 Cone winder 24 heads.
E16
\815183
3
COMEZ Crochet knitting machines mod.COMEZTRONIC CT600
FAT yoc 2005/2004, gauge 15, with DATA CONTROL 3, with
picker system, feeding creel 400 ends, gauge 240x240
mm., delivery on hank.
E17
\811448
2
PAFA chenille yarn machines, yoc 2000, 104
spindles single-side, ring dia.115 mm., tube 450
mm.
E17
\812523
6 GIGLIOTTI & GUALTIERI Chenille
machines mod.ACTA yoc (1) 1997 and (5) 1996/1994, 96
spindles, ring dia.127 mm., tube 450 mm., gauge 200
mm.
E18
\812952
20 MELITRECS / LESMO Braiding machines,
yoc 1990-1995, 2 heads, 16 spindles, stick 104, bobbin
175 mm. x flange dia.65 mm.
E18
\813304
BRAIDING
MACHINES
- WINDING MACHINES
- PACK-UP
MACHINES
Machines details as per herewith attached
lists.
E19
\809948
2 ZERBO/RITE Hanks
reeling winder, mod. GX-50-T-ANC, yoc 2000/2001, width
5100 mm., winding speed 55O rpm, hanks width from 80 to
320 mm., dia frm 1200 to 3000 mm. , automatic knotting
device.
E19
\809951
5
ZERBO/RITE Hanks reeling winders, mod. GX-50-T-ANC, yoc
2001, width 5100 mm., winding speed 550 rpm, hank width
from 80 mm. to 300 mm., dia. from 1200 mm. to 2000 mm.,
automatic binding /knoting device.
E19
\811125
1
CROON & LUCKE Reeling machine mod. HB 5010 yoc 1996,
perimeter 1900 mm., 40 hanks (20x2) of 1 kg., or 20
hanks (10x2), autom. tyeing.
E19
\812976
2
TINTORI Reeling machines, mod. VANGUARD, yoc 1992 and
1993, 16 heads, perimeter 1100-1800 mm.
Last
updating 15.03.2010