F03
\820806
1
BONINO Card, yoc 1988, width 2800 mm., feeder, breast roller with 5
workers, drum diam. 2000 mm. with 6 workers, doffer diam. 1070 mm.,
with randomizer.
F03
\820326
1 FOR
Card, mod. MINICARDA, yoc 1985 about, reconditioned in 2000, double
doffer, w.width 2500 mm., without feeder, fully with rigid
clothings, with electric motors and controls.
F03
\820758
1 FOR
Card, type MINICARDA, w. width 2500 mm., single doffer.
F03
\820793
1 FOR
Card, yoc 1984 about, w. width 2500 mm.
1 TECNICA TESSILE Cross
Lapper, input width 2750 mm., delivery width 4200 mm.
F04
\820757
1
AUTOMATEX Cross Lapper, mod. FA 3000 TC renewed, yoc 2000, renewed
from automatex in 2010, entrance h. 3.000 mm., delivery h. 3.500
mm
Timing belts and conveyor belts in good conditions.
F04
\820755
1
AUTOMATEX Cross Lapper, mod. FA 2000 TC, yoc 1997 renewed in 2009,
entrance h. 3.000 mm., delivery h. 4.500 mm
Belts and the
conveyor belt need to be replaced.
F04
\820756
1
AUTOMATEX Cross Lapper, mod. FA 2000 TC renewed to FA 3000 TC, yoc
1995
Completed renewed from automatex in FA3000TC in 2007,
entrance h. 3.000 mm., delivery h. 7.000 mm
F06
\819380
1
ASSELIN Pre-needle loom, mod. T122, reconditioned by Asselin in
1987, w. width 2.550 mm., 3850 needles / linear m., stroke amplitude
60 mm., max 800 strokes/ min., complete with one spare needle board,
complete with all motors and control panel
F06
\810841
1
ASSELIN Pre-needle loom with cylinders, yoc 1976 about, width 5000
mm., 2 sets of boards from the top and from the down + 1 assembled,
1810 needles on 8 rows.
F06
\819409
1
FEHRER Pre-needler, mod. NL. 28, yoc 1983, w.width 3000 mm., working
hours about 16.000, stroke amplitude 60 mm., speed 800 rpm., 1250
needles per meter, 2 inlet rolls with steel fingers, electric motors
& control panel, 2 sets of needle boards.
F06
\819429
1
FEHRER Pre-needle loom, mod. NL-1000, yoc 1980, width 3000 mm., 1000
needles/mtl., needling from the top, electronic, with cross lapper
to deposit material on trolley.
F07
\819341
1
FEHRER pre-needle loom,
type NL 9/S 2.6, yoc 2003, punching 2700 mm., 5000
needles/l.m., run 60 mm.,
max rpm 1500 rpm, machine is setting in 1350 rpm., run 60
mm., with CBF system for introduction, needle stroke from up to
down.
F07
\819333
1
FEHRER pre-needle loom, type NL 9/S, yoc 1995, 3000 needles/l.m.,
1350 rpm., run 60 mm., with CBF system,cylinders with 5 fingers,
width 8.000 mm.
F07
\819611
1 DILO
Needle Loom Di Loom OR40, yoc 1990, width 4000 mm., needling from
the down, with electric panel, winding trolley, control desk,
inverter, 1000 rpm., 1600 needles/lin/meter.
F09
\811360
1
MALIFLIS for woven non-woven, width 4000 mm., with NENCINI
cross-lapper, input 2500 mm. x 4500 mm.
F09
\800035
1
MALIMO mod. KUNIT, yoc 1992, width 2800 m., gauge: 18 and 14,
rolling up system.
F10
\814489
1 MECA
SCACCO Quilting machine, yoc 2001, width 3200 mm., needles on 2
bars, electronic PC, 1000 rpm, lock stitch with rotary hook (giant),
delivery cutter.
F10
\814762
1 RESTA
Quilting machine, mod. MPUS, yoc 2001, width 3200 mm., w.width 2900
mm., for bed cover, autom. change spool 8.
F10
\820400
1 MECA
Quilting machine, mod. PB65 Ecording, yoc 2003, w.width 1650
mm.
Machine will be reconditioned.
F10
\820401
1 MECA
Quilting machine, mod. TECHNA 75, yoc 2000, w.width 1900
mm.
Machine will be reconditioned.
F10
\820403
1 MECA
Quilting machines, mod. 65 ECO MASTER, yoc 2000.
Machine will be
reconditioned.
F10
\820398
2 MECA
Quilting machines, mod. FARSIDE ECO 65, yoc (1) 1992 and (1) 1990,
w.width 1650 mm.
Machines will be reconditioned.
F10
\820399
1 MECA
Quilting machine, mod. CONVERT 65, yoc 1990, w.width 1650
mm.
Machine will be reconditioned.
F10
\815571
1 Line
composed of:
*1 GAMBA Cutting machine, yoc 1980 about, width 1000
mm.
*2 Openers, yoc 1970 about.
*1 ROLANDO Willow Card, yoc
1979 about, width 1600 mm.
*1 BECHERINI Tearing machine, yoc 1979
about, reconditioned 2005, width 900 mm., 1 drum.
*1
Beater.
*1 GAMBA Cutting machine, width 450 mm.
F11
\819431
1
STUTZNACKER MAMMUT Quilting machine, type VMK 3 330 KS, yoc 1995, 3
bars, with 5 longitudinal cutting devices.
F11
\819432
1
STUTZNACKER MAMMUT Quilting machine, type VM7, yoc 1980, 18 needles, simple
bar, lock stitch ROTATING HOOK, electronic, with longitudinal and
transversal cutting machine.
F11
\820472
1
MAMMUT Quilting machine, mod. 3 VMK-H 320, yoc 1988, max w.width
3200 mm., with electric panel and connection cables.
Details on
request
F12
\815213
1
COBBLE Tufting loom, yoc 1983 about, width 5000 mm., gauge 5/32",
yuta motion.
F12
\819813
1 EDGAR
PICKERING Tufting loom, mod. TUFTOMATIC, yoc 1984/85, fully
refurbished 1992/3 for
installation of Cross-over, width 4200 mm., gauge 1/10” with beams
feeding, unwinding, variable speed device.
F12
\820381
1 EDGAR
PICKERING Tufting loom, yoc 1967, width 4000 mm., 40 needles/100
mm., 400 rpm., cashfil, for velvet, cut pile, loop pile, synthetic
grass.
F12
\818676
1
Stenter frame GARANCINI, produced in early ’70, w.width 4000 mm.,
the oven is 50 meters long, with the material accumilation,
diathermic oil heating system; vertical pins chain, with the carpet
pile on the top side; revisioned (in 2010)
machine without
coating bench for material entrance.
F12
\815212
1
PENDRILL ENGINEERING LTD Tufting Loom, yoc 1985 about, width 4000
mm., gauge 1/8", 4 scrool cylinders, yuta motion (movimento
yuta).
F13
\820480
1
Tearing line composed of:
-1 GAVAZZI shear bale cutter, type TC, yoc 2005 with spare
blade
-1 PUGGELLI rotary bale cutter, type TC 1500, 1500 mm., yoc
1998, with spare blades
-2 PUGGELLI rotary cutters, type TR1000,
1000 mm., yoc 1995, with spare blades
-2 OMMI automatic boxes,
type Omix, storage 3000
mm. x 1000 mm., yoc
1995/1999
-1 EFFEDUE air/dust total separator, mod. ST32/22C, yoc
1995
-1 EFFEDUE thickening device, mod. ADD/A-700/4, yoc
1995
-1 ITALIANA RIGENERAZIONE tilting loader, yoc 1996, 1500
mm.
-1 ITALIANA RIGENERAZIONE tearing machine, mod. OG113, yoc
1996, 1500 mm., 5 drums
-1 GUALMEC automatic
revolving press, mod. FRT/300, yoc 1997, 300 tons, complete of
electronic weighing scale, unloading and electrical wiring
-1
transformer
-1 MVM blade grinding for cutters TR1000 and bale
cutter TC1500, mod. PX1000, yoc 2001
F13
\820645
N.1
tearing plant, composed of:
*1 OFFICINE VERGNASCO CHIAVAZZA
tearing machine, yoc 1997, 5 drums, width 2000 mm. (1 spare
drum)
*1 OFFICINE VERGNASCO CHIAVAZZA cutter, width 1600
mm.
*1 PUGELLI cutter, yoc 2001, width 1350 mm., with bale opener
feeder
*2 OMT boxes, yoc 2002, metallic belt translating box (1)
3 x 8 m., (1) 3 x 10 m.
*1 KENYA aspiration device
F14
\820732
1
BIANCO automatic cutter, type LT03, yoc 2007, for knitting fabric.
As new.
F14
\819430
1 GAMBA
Fibre cutter machine, width 450 mm.
F14
\809865
1 GAMBA
Rotary Cutter, yoc 1985 about, w.w. 400 mm., machine with
reconditioned blade.
F14
\818544
1
ROLANDO Rotary cutter, mod. RL-14, yoc 2000, width 800 mm., 3
blades.
F14
\818545
1
ROLANDO Rotary cutter, mod. RL-14, yoc 2000, width 500 mm.
F14
\818781
1
ROLANDO Rotary cutters, type RL10, yoc 1976, width 400 mm.
F14
\818197
1
ROLANDO Rotary Cutter, yoc 1974 about, blade 400 mm.
F14
\818541
1
ROLANDO Fibre cutter, yoc 1985 about, width 500 mm., hourly
production 600/700 kgs. about according to the type of fibre and cut
length.
F15
\813010
1 BOUDA
(simil) manual machine yoc 1995 about
*Dimensions: 2150 mm. x 850
mm. x h.1050 mm.
*Approx weight 700 kgs.
F15
\815251
1
MABOTEX gauze medical compresses and bagging machine, type MCA3, yoc
1997, w. width 400 mm., max. nr. of tracks 4, compresses sizes: min.
50 mm. x 50 mm, max. 300 mm x 100 mm., production: compresses of
min. size: 24.000 /hour, compr. of max. size: 18.000 /hour.
F18
\820674
1 DE
JULIES Calender for non-woven yoc 1995 about, width 4000 mm., 2
cylinders diam.500 mm.
Complete with : boiler, pumps group,
reducers control unit.
F20
\819309
1
ALGOTEX cutting system, type MATRIX X6, yoc 2007, with
accessories
F20
\820456
1
FABOTEX Longitudinal cutting machine, mod. TSL, yoc 2008, white
colour, width 2000 mm., with set of 50 new circular blades.
F20
\820457
1
FABOTEX Transversal Cutting machine, mod. TF/2, yoc 2008, white
colour, width 2000 mm., with set of 2 new circular blades.
F20
\820033
1
TECNOTEAM Cutting machine for fabric, width 3600 mm.
F26
\818198
1
Garnett HARTMAN 1 drum,
width 1600 mm.
A03
\819911
1
BOCCHIO Blending box, yoc 2003, length 19 m. x width 3 mt. x h.4
mt., with incoming bin emptier.
A03
\818772
3
BOCCHIO Blending boxes, yoc 1994, dimensions: width 4,5 m. x 8 m. x
h. 2,97 m., with 1 translating bin emptier
A03
\818773
1
BOCCHIO Blending box, yoc 1984, length 16,4 m. x width 3,50 mt. x
h.4 mt., with fix bin
emptier, metallic belt, 3 cyclones.
A03
\816917
2
OMAB Boxes, length 5000 x w.width 3000 x h.5000 mm., with moving
belt, 1 bin emptier.
A06
\818638
1
GUALCHIERANI opener, yoc 1980 abt., w. width 1600 mm.,
*1st
table, cylinders entry, length 3800 mm., width 1400 mm.
*2nd
table, cylinders entry, length 1200 mm.
Opening cylinders
A06
\820746
1
MECAP Opener Willow, mod. GOLD, yoc 2008, width 1550 mm.
A06
\820183
1
OCTIR Willow Card 1000 mm
A06
\820182
1
ROLANDO Opener width 1200 mm.
A06
\818199
1
ROLANDO Opener, width 900 mm.
A06
\818200
1
Yarn opener (tirafiletti)
F01
\817941
1
Installation for non-woven production, composed of:
1 BONINO
Carding set yoc 1980, width 2500 mm.
1 Feeder
1 Breast
roller.
3 Cards with elastic carding cloths, each card with 2
drums diam.1500 mm., doffer diam.800 mm.
1 TECNICA TESSILE
Cross-lapper width 4500 mm., speed 100 m./minute.
1 MALIMO
MALIWATT Loom type 14013 yoc 1980, width 3600 mm., gauge
22.
Delivery: immediate.
F01
\817943
1
Installation for non-woven production, composed of:
1 BONINO
Carding set, yoc 1986, width 2800 mm.
1 Feeder
1 Breast
roller.
2 Cards with rigid carding cloths
1 NENCINI
Cross-lapper, yoc 1986, d.c. motors.
1 MALIMO MALIWATT Loom, type
14013, yoc 1986 width 3600 mm., gauge 22.
Delivery: immediate.
F01
\819578
1
Complete tearing plant, composed of:
-1 SATURNIA cutter, w.
width 1000 mm.,
-1 PUGGELLI rotative cutter, 4 blades, 15
kW.
-1 PUGGELLI rotative cutter, type TR850, 3 blades, 15
Kw
-2 GUALCHIERANI automatic and independent boxes, dimensions
9000X2500 mm., height 4.500 mm.
-1 Feeder for tearing machines,
with condenser fed by 2 boxes.
-1 Tearing machine, 5 groups, w.
width 1000 mm., 1st. and 5th. groups
DELL’ORCO, *2nd., 3rd. and 4th.
groups ITALIANA RIGENERAZIONE
-1 Beater
At FIXED BOLTS at the
output of thetearing machine towards direction of the
presses
-1
ITALIANA PRESSE press, type GR, 150 tons
-1 ITALIANA PRESSE
vertical press, type PFT, 70 tons
-1 F2 deduster, 50.000
m3/hour.
-1 Sharper for cutter blades, MVM GM 1000
mm.
-Various spare parts
F02
\818607
1
Needling line, width 3200 mm., for the production of non-woven
fabric of 80 gr./m., production 100-110 kg/hour, composed of:
- 1
RAMELLA card, width. 2500 mm., chute feeder, randomizing rollers, 1
single doffer.
- 1 2N Cross lapper, entry width 3200 mm.,
delivery width 4000 mm.
- 1 AUTOMATEX pre-needle loom, yoc 1986,
width 3400 mm., 5000 needles/lm., max 1000/1200 rpm.
- 1 FEHRER
needle loom, mod. NL24, yoc 1973, w. width 4400 mm., 6000
needles/lm. (of which: 3000 needles on top and 3000 needles on
bottom)
- 1 Rolling up system, table width 3200 mm., air roll
press, 5 cutters for longitudinal cutting
- 1 Dust suction
installation
- 1 ITALIANA Rigeneration beater
Last
updating: 04.02.2015
