J04 \817314
2
BELLINI bobbin dyeing vats, type RBNV 1600/1965, yoc 1996, 240 cones
(2 baskets x 24 staffs each x 5 cones 6"), 6478 lts., bobbin diam.
235 mm., programmator Leonardo 486, pressure 5 bars, temp. 160°C,
work in parallel
J04 \817315
2
BELLINI bobbin dyeing vats, type RBNV 1600/1965, yoc 1999, 240 cones (2 baskets x 24
staffs each x 5 cones 6"), 6478 lts., bobbin diam. 235 mm.,
programmator Leonardo 486, pressure 5 bars, temp. 160°C, work in
parallel
J04
\814152
*1 LORIS BELLINI Vertical Dyeing Autoclave for
cones mod.RBNV 840/975
yoc 1997, 40/48 cones, 70/80 kgs., LEONARDO programmator (original
from BELLINI), staff n.8, bobbin high 170 mm., 5/6 bobbin x staff, +
2 set storage-cones complete of n°8 staff each + n°16 springs
disks.
*1 LORIS BELLINI Vertical Dyeing Autoclave mod.RBNV
1040/975 yoc 1994, 70/84 cones, 120/140 kgs., LEONARDO programmator
(original from BELLINI), staff n°14, bobbin high 170 mm., n°5/6
bobbin x staff, + 3 set storage cones complete of n°14 staff each +
n°42 springs disks.
J04 \814153
1
LORIS BELLINI Horizontal Dyeing Autoclave for cones mod.RBNO
1400/1500 yoc 1997, 165/198 bobbins su un carrello , 280/330 kgs.,
inverter, LEONARDO programmator (original from BELLINI), staff n°33,
bobbin high 170 mm., 5/6 bobbin x staff,
+2 set storage cones
complete of n°33 staff each + n°66 springs disks + 1 trolley x
storage cones.
J04 \814154
2
LORIS BELLINI Horizontal Dyeing Autoclave for cones, mod.RBNO
1400/3000, yoc 2002, 330/396 bobbins, 550/650 kgs., inverter,
LEONARDO programmator (original from BELLINI), staff n°33+33, bobbin
high 170 mm., n°5/6 bobbin x staff, + 8 set storage cones
complete of n°33 staff each + n°264 springs disks + 4 trolley x
storage cones.
Machines can be sold only together.
J04 \814943
1
DIZMA Vertical bobbins dyeing autoclave yoc 1993, underpressure
140°C., 700 kgs. about, 2 supporters for material, capacity 432
bobbins h.175 x dia.230
mm.
J04 \814937
1
ILMA Vertical bobbins dyeing autoclave yoc 1963, underpressure
140°C., 50 kgs. about, 1 supporter for material capacity 36 bobbins
h.175 x dia.220 mm.
J04 \814938
1
ILMA Vertical bobbins dyeing autoclave yoc 1963, underpressure
140°C., 120 kgs. about, 2 supporters for material capacity 84
bobbins h.175 x dia.220 mm.
J04 \814939
2
ILMA Vertical bobbins dyeing autoclaves yoc 1976, underpressure
140°C., 240 kgs.about each :
3 supporters for material, capacity
205 bobbins h.175 x
dia.190 mm.
4 supporters for material, capacity 140 bobbins h.175 x dia.230 mm.
J04 \814941
1
ILMA Vertical bobbins dyeing autoclave yoc 1965, underpressure
140°C., 500/600 kgs.about :
1 supporter for material, capacity
505 bobbins h.175 x
dia.190 mm.
3 supporters for material, capacity 360 bobbins h.175 x dia.230 mm.
J04 \814942
2
ILMA Vertical bobbins dyeing autoclaves yoc 1976, underpressure
140°C., 500/600 kgs.about,
3 supporters for material, capacity
360 bobbins h.175 x
dia.230 mm.
J04 \816580
1
Second hand vertical dyeing machine for cones Mod. ILMA Simplex
T
-Capacity 400 Kg (diam. Max 230 mm)
-High temperatur2 (140
°C)
-High pression : 5 atm
Complete with
:
-Motor
-Pumps
-Automatic valves
-Expansion tank
-1
Hold material doble floor
-1 Hold material for spare
-Electric
panel
-Separetly programming unit (mod. Salce)
J04 \813433
1
MASTER Dyeing machine, yoc 1973, diam. 1380 mm., for bobbins
6"/5", dia.170 mm., 400
kgs.
Dyeing machines for bobbins 6"/5", dia.170 mm., of which:
*1 MASTER yoc 1970, diam. 1100 mm., 200 kgs.
*1 MASTER yoc
1967, diam. 1100 mm., 200 kgs.
*1 POZZI yoc 1965, diam. 1100
mm., 200 kgs.
1
POZZI Dyeing machine for bobbins 6"/5", dia.170 mm., yoc 1965, diam.
1100 mm., 100 kgs.
J04 \814945
1
NOSEDA Vertical Bobbins dyeing autoclave yoc 1983, underpressure
140°C., 400 kgs.about :
2 supporters for material, bobbins
dia.230 mm.
2 supporters for material, bobbins dia.210
mm.
capacity 240 bobbins
h.175 x dia.240 mm.
capacity 288 bobbins h.175 x dia.220
mm.
J04 \815091
2
OBEM Bobbins dyeing machines mod.AP-10 yoc 1993.
1 OBEM Bobbin
dyeing machine mod.AP-20 yoc 1986
1 OBEM Bobbin dyeing machine
mod.AP-5 yoc 1982
1 OBEM Bobbin dyeing machine mod.AP-3 yoc
1993
1 OBEM Bobbin dyeing machine mod.AP-2 yoc 1993
J04 \816765
2
OBEM Bobbins dyeing machines yoc 1986/87, 20 tubes each, tube
dia.275 mm.
3 OBEM Bobbins dyeing machines yoc 1986/87, tube
dia.275 mm., of which:
(2) with 5 tubes each.
(1) with 3
tubes.
J04 \809481
2
POZZI Horizontal dyeing machines, mod. CUBOPAC 1250, yoc 1993, at
pressure, working in parallel, 128+128 cones, total automation,
ARCTRONIC programmators, equipped with double can, inverter.
J05 \817471
2
FLAINOX Loose dyeing autoclaves mod.RK ATT HT 50 yoc 1996, 50 kgs.
each, 420 lts. each.
J05 \816540
1
GIACHINO Dyeing machine yoc 1963, complete with ISPEL certification,
with 1 supporter for raw material 100/80 kgs., 1 supporter for
cones, gauge 180 mm. for bobbins dia.160 mm., capacity 1050 liters,
3 atm., 138°C., stainless steel.
J05 \817083
1
MASTER Dyeing machine for loose type AM 200S yoc 1986, 100 kgs.,
SETEX 515 programator
2 MASTER Dyeing machines for loose, yoc
1985/86, 300 kgs. each., SETEX 515 programator
2 MASTER Dyeing
machines for loose, (1) mod.AM-100S yoc 1990 and (1) yoc 1985, 70
kgs. each, SETEX 515 programator
J07 \814933
1
BELLINI Hanks dyeing autoclave yoc 1984, underpressure 0,4 bar,
capacity 150 kgs. about, 2 supporters for material, 42 sticks= 3/4
kgs. each stick.
J07 \814934
1
BELLINI Hanks dyeing autoclave yoc 1987, underpressure 0,4 bar,
capacity 80 kgs. about, 2 supporters for material, 21 sticks= 3/4
kgs. each stick.
J07 \814935
2
BELLINI Hanks dyeing autoclaves yoc 1987, underpressure 0,4 bar,
each with capacity 40 kgs. about, 2 supporters for material , 11
sticks each machine= 3/4 kgs. each stick.
J07 \815764
3
LORIS BELLINI Hanks dyeing machines yoc (1) 1977 and (2) 1979,
capacity 72 kgs. each, 18 sticks each, low thickness, removable
trolley, withOBSA JUKER PM1000 programmator, double set of
sticks.
J07 \815767
1
LORIS BELLINI Hanks dyeing machine yoc 1973, capacity 288 kgs., 72
sticks, low thickness, removable trolley, with OBSA JUKER
PM1000 programmator,
double set of sticks.
J07 \815776
2
LORIS BELLINI Hanks dyeing machines, yoc 1970, low thickness, with
programmator, double set of sticks, of which:
1 capacity 14 kgs.,
14 sticks.
1 capacity 30 kgs.
J07 \815862
1
LORIS BELLINI Hanks dyeing machine yoc 1984, capacity 72 kgs.wool
/90 kg. cotton, 18 sticks, stainless steel high thickness, removable
trolley, with ARCTRONIC 437 programmator, double set of
sticks.
J07 \812146
1
COMIX Hanks dyeing autoclave, yoc 1992, HT, capacity 2 kgs., hank
dia.2000 mm., stick length 1000 mm., with
programmator.
J07 \817489
2
CUBOTEX Hanks dyeing machines yoc 1999, 360 kgs. each, removable
basket.
J07 \814932
2
CUBOTEX Hanks dyeing machines mod.AMRE 200 P/AS 860 A DUOMAT yoc 2001, under pressure 0,4
bar, machines can work in parallel, capacity 270/350 kgs. each, 72
sticks for each machine with capacity 4/5 kgs.each stick.
J07 \812145
4
OBEM Hanks dyeing autoclaves, mod. MBC 350/2/08 CE, yoc 1992, HT,
capacity 350 kgs, double carriers, hank dia. 2000 mm., stick length
1000 mm., with programmator, single or in
parallel.
J07 \813032
1
OBEM Hanks dyeing machine mod.MBC-350 yoc 2002, in parallel, total
capacity 1000 kgs. (4 cabinets each of 250 kgs.), with programmer
A&S PC3000 HMI.
J07 \815765
1
OBEM Hanks dyeing machine yoc 2001, capacity 28 kgs., 14 sticks,
stainless steel high thickness, with ARCTRONIC 537 programmator,
double set of sticks.
J07 \815766
1
TEXMATIC Hanks dyeing machine yoc 1994, capacity 18 kgs.,9 sticks,
stainless steel high thickness, with programmator, double set of
sticks.
J08 \812872
5
CUBOTEX Hanks dyeing machines mod. AMRE 200P/AS 700A yoc 1993/92/91,
capacity 320 kgs. each., of which 2 machines in
parallel.
J08 \814568
2
CUBOTEX Hanks dyeing machines, mod. AMRE 25P/AS 760, yoc 1992,
temp.95°/98°C., capacity 40 kgs
Were loaded 10 sticks lenght 1000
mm., each machine is equipped with 10 sticks over + 10 sticks under
= 20 x 2 sets = 40 sticks tot.
Could be also available
:
loaded 10 sticks lenght 1000 mm., each machine is equipped with
9 sticks over + 9 sticks under = 18 x 2 sets = 36 sticks
tot.
microprocessor CT400, inverter.
J08 \814571
1
LORIS BELLINI Hanks dyeing machine mod.APPCR 50 yoc 1988,
temp.108°C., capacity 80 kgs., microprocessor CT400, 2 taking off
trolleys.
J08 \814572
1
LORIS BELLINI Hanks dyeing machine mod.APPCR 100 yoc 1987,
temp.108°C., capacity 160 kgs., microprocessor CT400, 2 taking off
trolleys.
J08 \814573
2
LORIS BELLINI Hanks dyeing machines yoc 1985 and 1983, temp.108°C.,
capacity 320 kgs. each, microprocessor CT400, 2 taking off
trolleys.
J08 \814574
2
LORIS BELLINI Hanks dyeing machines yoc 1977, temp.108°C.,capacity
each machine: cotton
360 kg./ wool 300 kg. / acrylic 250 kg, MG ELETTRONICA programmer
type DCS 200 yoc 2006, 2 taking off trolleys, machines can work
together.
J08 \816185
1 MEZZERA Hanks
dyeing machine yoc 1998, 12+12 arms, in tandem, with SATE MK2
programmator.
J08
\816186
1 MEZZERA Hanks dyeing machine mod.COBRA yoc
1990 about, 4 arms, programmator SATE MK0
J08
\816187
1 MEZZERA Hanks dyeing machine yoc 2002, 2 arms,
programmator SATE MK0
J08 \816188
1
MEZZERA Hanks dyeing machine yoc 1998, 2 arms, programmator SATE
MK0
J08 \816189
1
MEZZERA Hanks deying machine yoc 1997, 4+4 arms, programmator SATE
MK0
J08 \817451
1 MEZZERA Arm hanks
dyeing machine mod.TMB yoc 2001, 8 arms.
J08
\814874
MINOX Hanks dyeing machines :
1 x 8 Kgs
1
x 20 Kgs
1 x 40 Kgs
1 x 80 Kgs
3 x 160 Kgs
With
temperature programmer.
J10 \814936
1
ALEA Hanks dryer yoc 1980 abt., 4 compartments.
J10
\816353
1 ALEA Dryer yoc 1988, battery on 2001.
J11 \815702
1
JAEGGLI Hanks mercerising machine mod.MMU yoc 1986 about, 70
kgs./h., with loading robot.
J11 \817488
2
JAEGGLI Hanks mercerising machines mod.HL 2000 yoc 1999/2000
4
hanks x 1,250 kgs
x 2 arms.
1 ECOBLOC
J11 \812837
1
KASAG Soda Recovery plant, mod. AISI 316, yoc 1990, production 2600
lt/h of input H2O +
NaOH with 5 BE output : NaOH a
28 BE about.
J14 \812271
1
Continuous printing machines for yarns, with PLC yoc 2000, 6
colours, bobbins feeding, delivery 48 hanks.
J15 \817073
1
MINNETTI Hydro Extractor mod.PDCA 1900 yoc 2007:
double
cover
basket in stainless steel AISI-304
basket dia.1900 mm. x
h.1020 mm. about.
capacity: 400 kgs. dry fabric.
650
rpm.
control panel
motor a.c. 37 kw with inverter.
J15
\817297
1 MINNETTI Hydro extractor yoc 1980 about,
dia.1500 mm., 1 removable basket with upsetting bottom, optimal for
hanks, with electric panel.
J15 \817152
1
POZZI Hydro extractor mod.ESHR 1500 yoc 1975, fix basket in
stainless steel dia.1500 mm., speed 650 t/m, max capacity 300 kgs.,
with column for loading and unloading, 11 kw.
J15 \813437
1
DETTIN BERTA 24 Hydro Extractor yoc 1989, diam. 740 mm., 1500 t/1',
60 kgs.
J15 \814040
1
Hydro Extractor Artigianal manufacturer yoc 1968, refurbished on
1992, with electric panel, inverter, stainless steel, dia.1800 mm.,
capacity 850 kgs., 600 t/1', motor breaking system, for raw
material.
J16 \814564
1
LORIS BELLINI Rapid Dryer yoc 1971, capacity: 1 supporter for
bobbins of 200 kgs. or 2 supporters from 100 kgs.
each.
J16 \814525
1 OBEM rapid air dryer,
yoc 1995, capacity 450/500 kgs., 2 trolleys 10 tubes each
J17 \815928
1
STALAM HF Dryer mod.RF 2X75 KW yoc 1998, 2 compartments of 75 kw.,
for tops/bobbins.
J17 \816622
1
STALAM RF Dryer yoc 1987, 2 compartments, 60 kw. (30+30), for
tops/bobbins.
J18 \814948
1 BELLINI
Bobbins Dryer yoc 1989, 500 kgs.
J18 \813331
1
MINNETTI Bobbins Dryer yoc 1995, with electronic weighing systems,
150.000 kcal, capacity max 576 bobbins, 4 trolleys of 36 sticks x
8/9 bobbins, dimentions: 320x350xh.450 cm., double dryeing room,
ventilator drived by inverter.
J18 \816581
1
MINNETTI Second hand Dryer for cones
Continuos operating in
tunnel
Dimensions : mt 13 lenght, mt 3,5 widht
Complete with 2
set of trolleys
Capacity : 2.000 Kg / day (cotton bobbins)
J18 \816467
1
POZZI Dryer for bobbins mod.DRYPAC-50 yoc 1998, hot air, 4 trolleys
(2 inside and 2 outside), trolleys of 25 tubes x 6 bobbins, 150
bobbins each trolley, total capacity of the dryer 300
bobbins.
J19
\815127
N.1
SICAM Dryer (white) yoc 1968, 5 fields, prod.400 kgs./h.
about, up dating 2000. steam
J01 \814669
1
DYEING INSTALLATION, suitable to process: acrylic tow, wool tops,
and raw material,
production: 15.000 kgs./24hours tow acrylic, composed
of:
*5 FLAINOX autoclaves, type RK, (4) yoc 1980 and (1) yoc
1984, HT, dia.1300 mm., capacity 250/300 kg. cotton, 400 kg. tops
wool, or 500 kg. acrylic tow
*1 FLAINOX autoclave, type RK, yoc
1996, HT, capacity 100 kg. (50+50 kg.)
*2 POZZI hydro-extractors
, type CS-1200-OL yoc 1980 and 1984.
*2 POZZI Loading press, type
PTSP yoc 1995-1998.
*1 POZZI Basket extractor, type DAP/E yoc
1995.
*1 MG ELETTRONICA vats programmer , type DCS-200 yoc
2002.
*1 FLAINOX Colours Dissolving System yoc 1995.
J01 \814969
1
Dyeing plant for loose fiber or tops, capacity 12.000 kgs./24 h.,
composed of:
1 POZZI Loading Press mod. PTST yoc 1995.
6 FLAINOX Dyeing autoclaves
for tops/loose, yoc 1995, temp.130°C., of which:
(2) capaciy
500/400 kgs., lt.2.235
(4) capacity 250/200 kgs.,
lt.1.705.
Programmators DALMA Videodye/2.
Each autoclave
complete of n°2 set of carriers:
400-500 kgs : dia.1300 mm. x
h.1150 mm.
250/200 kgs : dia.1300 x h.740 mm.
1 POZZI Hydro
extractor mod. CS/CC del 1995,
8000 turns, capacity 600 kgs.
1 POZZI Cake extractor mod,
DAP/E year 1995
J01 \815010
1
Bobbins dyeing plant composed of:
4 OBEM Horizontal autoclaves
yoc (1) 1980, (1) 1982, (2) 1992, each 10 tubes, 120 kgs., 1200
liters.
6 OBEM Horizontal autoclaves yoc (1) 1987, (1) 1989, (2) 1992, (2)
1997, each 20 tubes, 240 kgs., 2400 liters.
3 OBEM Horizontal
autoclaves yoc 2001,
each 40 tubes, 480 kgs., 4800 liters.
2 OBEM Hydro
extractors, (1) 1993 and (1) 2000.
4 OBEM RF Dryers (2) yoc 1993
and (2) yoc 2000.
2 OBEM Shuttles for bobbins moving yoc 1995 and 2000.
1
GUALCHIERANI Autom. plant for bobbins loading/unloading
J01 \815011
1 Tops dyeing plant composed
of:
1 OBEM Press mod.PBF 1070 + PU/BF + TG1070 yoc 2000.
1
OBEM Press yoc 1987.
3 NSC Intersectings GC12 yoc 1987.
1
Loose Feeder mod.cyclon
yoc 1987.
2 Robots
mod.ATAM
yoc 1987 and
2000.
1 Robot mod. SETAM yoc 1987.
2 Traslators ATAM-SETAM
OBEM yoc 1987.
1 Extractor Big-Form OBEM yoc 1987.
2 Hydro
extractors CIMA mod.1250 PCO yoc 1991 and 1995.
2 Backwashing
machines CMT yoc 2001, each 4 vats / 6 presses.
1 Dryer STALAM
mod.LTRF-RFA 50+50 KW yoc 2001.
1 Dryer STALAM 30+30 kw yoc
1987.
4 NOVASTIR Gills mod.PR-REP-CA (2) 2001, (2) 1996.
1
NOVASTIR Gill mod.PR-CA-REP
1995.
1 Packing machine SIGNODE mod.710 /T.I. yoc
1995.
1 TECNOMECCANICA BIELLESE Press yoc 1995, feeder 550 x 12.
11 OBEM
Vertical dyeing autoclaves for tops of which:
7 of 180/240 kgs., (3) 2001,
(2) 1991, (1) 1999), (1) 1995.
2 of 120/160 kgs., yoc
1990.
2 of 60/80
kgs., yoc 1990.
J01 \815582
1
Yarns dyeing plant composed of:
-2 OBEM Bobbins dyeing machines
mod.API.O/10/260 yoc 1997/1989, can work in single or in parallel,
10 tubes each, programmator D'ALMA VIDEODYE/2.
-1 OBEM Bobbins
dyeing machine mod.API.O/3 yoc 1997, 3 tubes.
-1 OBEM Bobbins
dyeing machine mod.API.O/2 yoc 1998, 2 tubes.
-1 OBEM Bobbins
dyeing machine mod.API/L/2 250 yoc 1994, 3 bobbins.
-1 DETTIN
Hydro extractor mod.BERTA 24 yoc 1987.
-1 OBEM Hydro extractor
mod.IC/5/IA yoc 1990, capacity 342 kgs.
-1 OBEM Tubes
feeder.
-1 OBEM Radio Frequency Dryer mod.ERF/BT/10/260 yoc 1996,
10 tubes.
-3 Trolleys with tubes.
J01 \816738
1
LORIS BELLINI Bobbins Dyeing Line yoc 1984 about, composed of:
*2
Horizontal dyeing machines capacity from 350 to 700 kgs.
*2 Dryer
at forced-air.
J01
\816739
1 LORIS BELLINI Bobbins dyeing line yoc 1984
about, composed of:
*5 Horizontal dyeing vats, capacity from 350
to 700 kgs.
*3 Dryers at forced-air.
J01 \816740
1
OBEM Bobbins dyeing line composed of:
*2 OBEM Dyeing machines
mod. APO/18/300 yoc 2003
*1 Dryer mod. ERD/O/18/300 GPA AP, tube
1000 mm.
*1 Hydro Extractor mod.IC 10/E/A/300, yoc 2002, 550
kgs.
*GUALCHIERANI Autom. plant for bobbins
loading/unloading.
J01 \816741
1
OBEM Bobbins Dyeing Line yoc 1991 about, composed of:
*7 Dyeing
vats mod.API-O8-300-1000 A, (5) 8 tubes each, (2) 4 tubes
each.
*2 Dryers at forced-air.
*1 Hydro extracto.
J01
\817353
HORIZONTAL DYEING PLANT
2 LORIS BELLINI
Horizontal Dyeing machines mod.RBNO 1400/2000 del 1994, capacity 600
bobbins (can work 300 or 150 bobbins), they can work singular or in
parallel.
Plant complete with preparation tank, n. 2 small cases
for dissolution of dyes and auxiliaries, volumetric meter, flow
controller of the bath, inverter control, complete with clay
interlayers,
caps and carrier for materials.
2 LORIS BELLINI
Horizontal dyeing machines mod.RBNO 1400/2000 del 1998, capacity 600
bobbins (can work 300 or 150 bobbins), they can work singular or in
parallel.
Plant complete with preparation tank, n. 2 small cases
for dissolution of dyes and auxiliaries, volumetric meter, flow
controller of the bath, inverter control, complete with clay
interlayers,
caps and carrier for materials.
1 MINNETTI Quick
dryer mod.P/A, 144 bobbins.
1 MINNETTI ATM dryer, 360
bobbins.
1 UGOLINI ATM dryer, mod.ER/2C del 2001, 47 kw, 360
bobbins.
1 MINETI Automatic System for loading and discharge
bobbins with pneumatic manipulator.
VERTICAL LINE DYE
1 LORIS
BELLINI year 1983
Dyeing plant cones pressurized air
cushion
Capacity: from 144 – 288 cones
Programmer:
Termoelectronics CP/400
Plant complete with preparation bath tub
and small case for colors introduction, complete with clay
interlayer’s, Geidner caps and carrier for materials.
1 INOXA
Tank year 1966
Dyeing plant pressurized expansion
tank
Capacity: 488 cones
Programmer: Termoelectronics
CP/400
Plant complete of preparation bath tub and small case for
colors introduction, complete with clay interlayer’s,
Geidner
caps and carrier for materials.
1 LORIS BELLINI Tank year
1985
Dyeing plant cones pressurized air cushion
Capacity: from
40 – 80 cones
Programmer: Termoelectronics CP/400
Plant
complete with preparation bath tub and n. 2 small cases for colors
introduction, complete with clay interlayer’s,
Geidner caps and
carrier for materials.
1 LORIS BELLINI Tank year 1986
Dyeing
plant cones pressurized air cushion
Capacity: from 144 – 288
cones
Programmer: Termoelectronics CP/400
Plant complete with
preparation bath tub and small case for colors introduction,
complete with clay interlayer’s, Geidner caps and carrier for
materials.
1 LORIS BELLINI
Tank year 1999
Dyeing plant cones pressurized air
cushion
Capacity: from 40 – 80 cones
Programmer:
Leonardo
Plant complete with preparation bath tub and small case
for colors introduction, complete with clay interlayer’s, Geidner
caps and carrier for materials.
1 LORIS BELLINI Tank year
2005
Dyeing plant cones pressurized air cushion
Capacity: from
20 - 40 – 80 cones
Programmer: Leonardo
Plant complete with
preparation bath tub and small case for colors introduction,
complete with clay interlayer’s,
Geidner caps and carrier for
materials.
1 LORIS BELLINI Tank year 2005, 2 vertical
tubes,
Dyeing plant cones pressurized air cushion
Capacity:
from 5 cones diam. 18” by 1 Kg
Programmer: Leonardo
1 LORIS
BELLINI Quick vertical dryer mod.ASR.
year 1983
Capacity:
from 40 – 300 Kg
Complete with compressor and vacuum
DYEING LABORATORY
J01
\817478
*2 OBEM Horizontal bobbins dyeing autoclaves,
type API/O/20 and
API/O/30 , yoc 1995, diam. 273 mm., with pot in expansion,
recover baths pot,
colors kitchen barrel, Video DYE/2 D'ALMA, inverter.
*can
work in parallel.
*1 OBEM Horizontal bobbins dyeing autoclave,
type API/O/40 , yoc 1998, diam. 273 mm., with pot in expansion,
recover baths pot,
colors kitchen barrel, Video DYE/2 D'ALMA, inverter
*1
OBEM Hydro extractor, type IC10/R, yoc 1996, diam. 273
mm.
*1 OBEM Radio frequency dryer, type ERF BT/O/10, yoc 1995, 10
tubes, diam. 273 mm.
*1 OBEM Air dryer for bobbins, type
ERD/5/300, 10 tubes, diam. 273 mm.
*1 OBEM press, type PR 2500/2C/RC , yoc 2000, diam.
273 mm.
K03
\806866
Vertical Dyeing machines , of which:
- 2
M.C.S., type ROTO DYE RD 100/120 , yoc (1) 1986 and (1) 1985,
capacity 150kg., with centrifuge incorporated, microprocessor
Termoelettronica CT-200.
- 2 FLAINOX mod.AR/TC/150 yoc
1986, capacity 150 kg., with centrifuge incorporated, microprocessor
Termoelettronica CT-200.
- 1 FLAINOX, type NRP80, yoc
1987, capacity 80 kg., with centrifuge incorporated, microprocessor
Termoelettronica CT-200.
- 1 FLAINOX for samples
mod.ARC/5 yoc 1986, capacity 5 kg., with time/temperature
programming system.
- 1
GAVAZZI for samples CAMPIOCOLOR RD/1 yoc 1986, atm pressure,
capacity 1 kg., with time/temperature programming system.
-
2 TRIVENETA Steam
tumblers type E-165R.RV yoc (1) 1985 and (1) 1986, capacity 160 kg.,
dia.1455 mm., steam heating.
K03 \817465
2
OMI for cotton piece dyeing /washing machines, type LSCO 360,
capacity 80 kg. each abt., horizontal basket, centrifugal, loading
from above
1 Dryer
K03 \816612
3
SPENCER Rotary garments washing and dye-extractors of which:
(1)
mod.DYTEX 27, 25 kgs., OBSA PM 1000 programmator.
(2) mod.DYTEX
54, 45 kgs.each, OBSA PM 1000 programmator.
K05 \810241
1
MCS Beam dyeing autoclave , type AT 13, 1400 x 1800, yoc 1999, w.w. 1800
mm., beams dia. 800
mm., fabric 240 mm , maximum temp. 151°C, complete of 2 beams, 2
trolleys for beams with supporters, MT rolling up system yoc 1999
for beams preparation, autoclave dia. 1300 mm. about.
K07 \813223
1
BRAZZOLI Jet dyeing machine, mod. SIRIO HT 400, yoc 2001, 8 tubes
linked 1.200 Kg. (possibility to work separately or together),
capacity 150 kgs. each tube, temp.140°C., control PC Setex 737
XL.
K07 \816213
1
BRAZZOLI SIRIO HT Jet yoc 1999 about, 100 kgs.
K07 \816539
1
BRAZZOLI Overflow mod.SATURNO S400 HT, yoc 1993, 4 ropes of 100 kgs.
each = tot.400 kgs., max temp. 140°C., with AREL APC
programmator.
1 BRAZZOLI Overflow mod.SATURNO S200 HT yoc 1993, 2
ropes of 100 kgs. each = tot.200 kgs., max temp.140°C., with AREL APC
programmator.
K07 \816670
2
BRAZZOLI Overflows mod. HT 50, yoc 1992, 1 corda, with CT-400
microprocessors
K07 \817227
1
BRAZZOLI SATURNO HTFA 400 yoc 2001, 2 ropes of 200 kgs. each =
tot.400 kgs., with electric panel, pump and tank for products
introduction.
Machine suitable for dyeing of knitting and shuttle
terry farbrics.
K07 \815632
1
LAIP Flow mod.900 HT yoc 2000, 2 ropes, for knitting.
K07 \815633
2
LAIP Airjet mod.AJ 2000 yoc 2002, each machine with 2 ropes
K07 \815634
1
LAIP Flow mod.600 HT yoc 2001, 1 rope of 150 kgs.
K07 \816747
2
LAIP jets, type Soft 600 HT, yoc 1994, of 240 kg. each. (2 ropes of
120 kg. each). Pressure 3,5 bar. Programmator Sate MK3, 2 tanks for
each machine, mixer, can work in parallel.
K07 \817052
1
LAIP HT Over-flow, type 600/6 SOFT HT, yoc 1996, 6 ropes, Jucker
Obsa P1000 programmator
K07 \817053
1
LAIP HT Over-flow, type 600/2 SOFT HT, yoc 1995, 2 ropes, Jucker
Obsa P1000 programmator
K07 \813843
1
LAIP Flow dyeing machine, mod. 600/2, yoc 1994, HT 145°C., suitable
also for knitting fabric, capacity 1 tube with 2 ropes each of 90
kgs. = tot.180 kgs.
K07 \816487
2
MCS HT Softflows yoc 1990/1989, 1 rope each, 50 kgs. each.
K07 \816530
1
“M.C.S.” Overflow MF 4J HT - Model yoc 2000 - n. 4 channel ;
capacity’ 150 Kgs ; total capacity 600Kgs each ; temperature 140 ° ;
System fitted with: bath circulation pump ; heat exchanger ; n. 02
tanks for the products ; water tank reserve on dyeing phase
(preparation of the bath) electric switchboard with SETEX 737 XL
(Full automatic)
K07 \816673
1
MCS Overflow mod.SF 100-64-HT yoc 2000, 3 ropes, canal 490x480 mm.,
autoclave lenght 8100 mm., autoclave dia.2160 mm.
K07 \817396
1
MCS Flow yoc 1991, HT 144°C., 5 kgs. for samples.
K07 \817426
1
MCS Soft flow mod. SF 100 1 S 38 HT yoc 1998, 1 rope 100 kgs., 4300
lts., temp. 144°C.,
pressure 3,0 bar, TERMOELETTRONICA CT301
K07 \817584
1
MCS Overflow mod.SF 100 2N-54-HT yoc 2001, 2 ropes, canal 490x480
mm., autoclave lenght 8100 mm., autoclave dia.1740 mm.
K07 \817585
2
MCS Soft-flows mod.SF 100 2S-54HTX2 yoc 1996, 2 ropes, combined,
canal 400x480 mm., autoclave lenght 7200 mm.
K07 \815322
1
MCS Over-flow mod.SOFT FLOW SF100 E 2S-44X2HT yoc 2001, for knitting
fabric, capacity 200 + 200 kgs., 3 bars, 144°C., programmator CT
301.
K07 \815323
1
MCS Over-flow mod.SOFT FLOW SF100 2S-44X 2H yoc 1997, for knitting
fabric, capacity 200 + 200 kgs., 3 bars, 144°C., programmator CT
301.
K07 \817054
1
MEZZERA HT Over-flow, 2 ropes.
K07 \809145
1
MINOX Over-flow, mod. DUO PRT 2C, yoc 2001, HT, 2 tubes, capacity
125+125 kgs.
K07 \814925
2
MINOX Jets type PRT 3/C yoc 1988, 3 tubes 240 kgs each machine, they
work in parallel, Sate programmator, max temp.148°C., max pressure
3,5 bars.
K07 \814926
2 MINOX Jets type
PRT 2/C yoc 1988, 2 tubes 160 kgs each machine, they work in
parallel, Sate programmator, max temp.148°C., max pressure 3,5
bars.
K07 \815192
1
SCLAVOS Over-flow yoc 1996, 2 tubes of 120 kgs. each = tot.240
kgs.
K07 \815543
2
TESSINOX MBC HT 2+2
Overflows yoc 1990 and 1989, capacity 200+200 kgs. each,
temp.151°C., CT 400 programmator.
K07 \815586
1
TESSINOX MBC HT 1+1
Overflow yoc 1990, capacity 100+100 kgs., temp.151°C., CT 400
programmator.
K07 \815587
1 TESSINOX MBC
HT 50 Overflows yoc
1989, capacity 50 kgs., temp.151°C., CT 400
programmator.
K07 \815588
1 TESSINOX MBC
HT 4+4 Overflows yoc
1986, capacity 400+400 kgs. each, temp.151°C., CT 301
programmator.
K07 \817599
1
THEN AIRFLOW Jet Dyeing machine yoc 1999, 1 tube, 1 rope.
K07 \816110
1
THEN Jet, mod. AIRFLOW 360,
yoc 1993, total capacity 360 kgs., 2 ropes,
temp.150°C.
K07 \814996
2
THIES mod. TRD 140/2 SOFT yoc 2000, 8 ropes tot., 500/600 m. each
rope, 388 grs. Linear meter.
1 DALMA ID CONTROLLER
Programming
1 DALMA ID CONTROLLER PROFILE
Programming.
Machines cannot be split.
K07 \814552
1
THIES Overflow mod.SOFT TRD 140/4 DS yoc 2003, 8 tubes, 600/800
kgs., SETEX 838 System., max temp.140°C.
K07 \817412
1
THIES Overflow mod.SOFT TRD yoc 2007, 4 tubes, total capacity 600
kgs., max temp.140°C., equipped with heat exchanger, self-cleaning
filter, PH control device, bath circulation pump, pneumatic valves,
2 products feeding, stainless steel electric panel, with SETEX 858
programmator.
K07 \816982
1
THIES Jet mod.TRD/140/2, yoc 1999, 2+2 tubes in parallel, 150 kgs.
each = tot.600 kgs.,
SETEX 737 XL programmator, inverter, Variojet.
K07 \816419
1
THIES Soft TRD 140/1 yoc 2002, 3 vertical pipes, volume of each pipe
1.200 liters, load for each pipe 120 kgs.
K08 \815589
2
BRAZZOLI Overflows mod.RC/LS/50 yoc 1986 and 1988, 2 ropes each,
temp.98°C., CT 301
programmator.
K08 \817103
1
FLAINOX Overflow mod.ATP yoc 1991, atm, 1 rope, 15 kgs.,
TERMOELETTRONICA CT82 microprocessor.
K08 \817107
1
FLAINOX Overflow mod.ATP yoc 1990, atm, 2 ropes, 200 kgs.,
TERMOELETTRONICA CT82 microprocessor.
K08 \817115
1
FLAINOX Overflow mod.ATP yoc 1986, atm, 2 ropes, 250 kgs.,
TERMOELETTRONICA CT82 microprocessor.
K08 \817116
1
FLAINOX Overflow mod.ATP yoc 1988, atm, 2 ropes, 200 kgs.,
TERMOELETTRONICA CT82 microprocessor.
1 FLAINOX Overflow mod.ATP
yoc 1988, atm, 2 ropes, 200 kgs., TERMOELETTRONICA CT82
microprocessor.
In parallel.
K08 \817118
1
FLAINOX Overflow mod.AT ATP/TC
yoc 1990, atm, 50 kgs., TERMOELETTRONICA CT82
microprocessor.
K08 \814597
1
MAIBO Over-flow mod.MEDUSA 3 yoc 1996, temp.98°C., 1 rope, fabric
capacity 500 m., SALCE S400 TT programmator.
K08 \814998
2
MAIBO atm flows mdo.U yoc 1995.
K08 \814610
1
MAIBO Over-flow mod. OF/PA5P, yoc 1993, tempo.98°C., 2 ropes,
prod.300 m., SALCE S400TT programmator.
K08 \814603
1
MAIBO Over-flow, mod. OF/PA 0,25 C, yoc 1991, temp.98°C., 1 rope,
fabric capacity 50 m., DALMA MICRO TI programmator.
K08 \814605
1
MAIBO Over-flow mod. OF/PA 0,5 CE, yoc 1991, temp.98°C., 1 rope,
fabric capacity 100 m., MG DCS60 programmator.
K08 \814606
1
MAIBO Over-flow
mod.OF/PA 0,5 CE, yoc 1992, temp.98°C., 2 ropes, fabric
capacity 200 m., MG DCS60 programmator.
K08 \814607
1
MAIBO Over-flow
mod.OF/PA, 2 CE, yoc 1992, temp.98°C., 1 piece, fabric
capacity 100 m., MG DCS60 programmator.
K08 \813440
1
MAIBO Over-flow yoc 1989 about, for weft/warp fabric, 2 ropes.
1
MAIBO Over-flow, yoc 1988 about, for weft/warp fabric, 3+3 ropes =
80 x 3 x 2 = 480 kgs.
K08 \810876
1
MCS Over-flow mod.SF 82.7 /8S 44 BT yoc 1995, atm, 4+4 ropes,
capacity 800 kgs., temp.98°c., CT 81 TERMOELETTRONICA
microprocessor.
K08 \816489
1
MCS Softflow dyeing machine for cotton and mixed fabric, mod. SF82,
yoc 1992, atm, 4 ropes, 500 kgs.
1 MCS Softflow yoc 1987, atm, 50
kgs., single rope.
2 MCS Softflows yoc 1989/90, atm, 100 kgs.
each, single rope each.
1 MCS Softflow yoc 1990, atm, single
rope, 150 kgs.
K08 \814598
1
MINOX Over-flow, temp.98°C., 1 rope, fabric capacity 50 m., without
programmator.
1 MINOX Over-flow, temp.98°C., 3 pieces, fabric
capacity 150 m., without programmator.
K08 \814608
2
MINOX Over-flows yoc 1989, temp.98°C., 2 ropes, fabric capacity 400
m. each, SALCE 731 programmator, they can work together.
K08 \814997
2
MINOX Soft flow 2C yoc 2000, 2 ropes each, 200 m. each rope, 98°C.
K09 \816669
1
MCS Jigger mod.MID-ELETTRONIC yoc 1999, w.width 2400 mm., dia.1000
mm.
K09 \808729
1
MEZZERA Jigger yoc 1985, table width 2000 mm., dia. 1450 mm.
1
MEZZERA Jigger yoc 1970, table width 2000 mm., dia.800 mm.
K09 \816553
2
MEZZERA Jiggers, mod.
VBJ 3500, yoc 1989, width 3500 mm., diam. 1100 abt., 1000
kgs.
K09 \816554
1
MEZZERA high temp. jigger, mod. HTP UNITEX, yoc 2005, table width
3800 mm., fabric width 3600 mm., temp. 149°C, diam. 1275 mm.
K09 \816555
1
MEZZERA high temp. Jigger, mod. HTP UNITEX, yoc 2001, table width
2000 mm., fabric width 1800 mm., temp. 143°C, diam. 1150 mm.
K09 \816767
1
MEZZERA atmospheric Jigger, width 3200, roll diam. 1000 /1200
mm.
K09 \817045
1
HT MEZZERA HTP jigger,
type CELSIUS 143, yoc 2000, table width 2200 mm., work. width
2000 mm., diam. 1150 mm.
K10 \816694
1
IN.TES Indigo Finishing line for denim, d.c. motors, speed 50
m./minute, composed of:
Input J-Box.
Brushing and beating
Unit.
IN.TES Cloth singeing machine with dust suction
device.
Impregnation vat with calender.
Sperotto Weft skewing
unit
Squeezing calender 12.000 kgs.
Tentering unit 9 m.
Dryer 20 cylinders
630 mm.
Delivery J-Box.
Kitchen for products preparation
composed of: 1 preparator of 1000 lts. and 2 stoking devices of 1500
lts.
K10 \816696
1
RAMALLUMIN Dyeing plant for denim yoc 1991, w.width 1500 mm., total
width 1800 mm., d.c. motors, max dyeing speed 35 m./1', composed
of:
1 Creel 12 positions max dia.1400 mm.
1 Calender
5
Dyeing vats in stainless steel: the first 2 vats with squeezing max
10.000 kgs with possibility of heating, the remaining max 5.000
kgs.
1 Vertical Pre-Dryer with 6 tefloned cylinders dia.800 mm,
max working pressure 5 bar.
7 Dyeing vats in stainless steel,
squeezing max 10.000 kgs. for 2 vats and remaining 5.000 kgs.
1
Steamer in stainless steel max 30 mt. of lenght.
3 Washing vats
in stainless steel squeezing max 10.000 kgs. for the last vat and
5.000 kgs. for the remaining.
1 Pneumatic Accumulator on wet of
120 m.
1 Vertical Pre-Dryer 8 tefloned cylinders dia.800 mm., max
pressure 5 bar.
1 Sizing vat in stainless steel squeezing max
3.000 kgs, direct and indirect heating 1,5 bar.
1 Vertical Dryer
motorized with 14 cylinders of which 8 tefloned dia.800 mm., max
pressure 5 bar.
1 Pneumatic dry accumulator of 600 m.
1 Calender
1
Beaming Head max beam width 2500 mm., max dia.1200 mm., max tension
600 kgs.
1 Sizing kitchen composed of: 1 Preparator 1600 lts., 1
Boiler 2000 lts, 1 Stocking 2500 lts.
K10 \816697
1
RAMALLUMIN Dyeing plant for denim, w.width 1500 mm., total width
1800 mm., a.c. motors with inverter, max dyeing speed 25 m./1',
composed of:
1 Creel 12 positions max dia.1400 mm. h. 1500
mm.
1 Calender
9 Dyeing vats in stainless steel, of which 2
vats with squeezing max 10.000 kgs, the remaining max 5.000
kgs.
9 rotating oxidation sets of 22 m. of air exposure.
3
Washing vats in stainless steel: squeezing max 10.000 kgs. for the
last vat and 5.000 kgs. for the other 2 vats.
1 Hydraulic
Accumulator on wet of 120 m.
1 Horizontal Pre-Dryer with 7
tefloned cylinders dia.800 mm, max working pressure 5 bar.
1
Sizing vat in stainless steel squeezing max 1.500 kgs, steam heating
1,5 bar.
1 Final Horizontal Dryer, 14 cylinders of which 5
tefloned dia.800 mm., max pressure 5 bar.
1 Pneumatic accumulator
on dry of 20 m.
1
Beaming Head max beam width 2500 mm., max dia.1200 mm., max tension
600 kgs.
1 Sizing kitchen composed of: 1 Preparator 800 lts., 1
Boiler 1000 lts, 1 Stocking 1500 lts.
K11 \804325
1
PAD STEAM Preparation-dyeing and BABCOCK cotton fabrics bleaching
combined plant, yoc 1990, suitable for dyeing and pre-treatment of
viscose lining, max working width 1800 mm., table width 2000 mm.,
speed 10-100 mts./min., composed of:
-Fabric entrance
combination.
-CONVITEX Impregnation unit.
-VARIFLEX Padder, 2
cylinders.
-fabric-guide device.
K12 \816674
1
BABCOCK HOT FLUE Dyeing line yoc 1996, complete with PLEVA AF 310
microwave meter, KUSTERS Padder 222-11-2000 and infra-red
system, dryeing
chamers, content 50 m. each chamber.
K13 \817587
1
MINNETTI Hydro Extractor for fabric, mod. PDCA 1800, yoc 1998,
width 1000 mm., w. width 850 mm., fabric capacity each cycle: 250 -
270 kg, with fabric loader. Machine revised as new.
M02 \815615
1
PENTEK Finishing bath mod.PENTAIR 2 B-A del 2002, 40 HP.
M02 \815614
1
BIANCALANI AIRO 1000 yoc 1991, 40 HP., for washing.
2 BIANCALANI
AIRO 1000 S, 40 HP, gas.
M02 \816671
1
BIANCALANI AIRO 1000 SPE yoc 1995, 2 ropes, 2 squeezing
groups.
M03 \817080
1
LAFER Brushing machine mod.ULTRASOFT yoc 2008, w.width 2200 mm., 6
cylinders, carbon brushes.
M03
\816709
CARU’ Cloth brushing machine, for dry fabric, H
1800 mm. composed of:
3 brushes (of which 1 normal and 2
spiral)
electric panel
big roll entry and delivery
external
suction
M03 \816938
1
EFFEDUE Brushing machine yoc 1989, width 2400 mm.
M05 \811229
2
FERRARO Polishing calenders, mod. C2E, yoc 1986, w. width 1700 mm.
for tubular knitting fabric., steam, pneumatic pressure.
M05 \814435
1
FERRARO Polish Calender mod.C2EFV yoc 1991, only for tubular
knitting fabric, max width 1300 mm., steam feeding, delivery
precision folding or rolling system.
M06 \817081
1
FERRARO for tubular mod.C2EFB yoc 1993, w.width 1200 mm., with
wideners, steam heating.
M06 \817413
1
LAFER Compacting machine mod.KSB SOFT PLUS yoc 2004, for opened
fabric, table width 2600 mm.
M06 \817563
1
SPEROTTO Shrinking machine for tubular knitted fabrics, mod. TS –
150, width 1500 mm.,
steam heating, tension 380/50 HZ.
Machine composed of: In feed
unit with J-box accumulator,
Foot board, Expanding device, Steamer unit, Double shrinking group, Cooling section with fabric
conveyor belt. Exit: folder and rolling device.
M06 \814078
1
SPEROTTO Calender, mod. C2/150B, yoc 1999, for knitting
fabric.
M06 \815329
1
SPEROTTO Compacting machine for knitting fabric mod.COMPACTA CK 240
yoc 1994, w.width 2200 mm., with expander stenter of about 5500 mm.,
with double compactor, MAHLO RFMC 94H-PLC, delivery rolling up
system.
M08
\812931
*1 ANZINI Calender for MOIRE' effect, yoc
1990, with cylinders
width 1600 mm.
M08 \815440
1
ANZINI Calender yoc 2000, width 2600 mm., 3 cylinders (1 paper-wool,
1 steel, 1 paper-wool),
electric heating.
M08 \815553
1
ANZINI Calender reconditioned yoc 1985, silk, width 1600 mm., 3 cylinders
(teflon/steel/paper-wool), electric heating.
M08 \815623
1
BETA Calender for cotton fabric yoc 1983, table width 2000 mm., 3
cylinders (steel/nylon/steel), 60 tons., electric/oil
heating.
M09 \817391
1
COLOMBO Embossing calender, width 1800 mm., complete with: 1
cylinder assembled + 1 cylinder as spare part.
M09 \813580
1
COMERIO Embossing Calander, yoc 1988, with cylinders width 1600
mm.
M09 \817326
1
LEMAIRE Calender for laminated PVC yoc 1990 about, width 1800/1900
mm., 1 embossing cylinder, electric.
M10 \817506
1
FERRARO cutter for knitting fabric, yoc 1989, width 2400 mm., with
crosslapper
M10 \817119
1
SPEROTTO cutting machine, type T-G/3, yoc 1987
M11
\816722
WEST POINT velvet cutting machine, mod 904, yoc
2004, with hydraulic control, fabric width 1829 mm.
Complete
of:
FORMIA NUOVA rolling and unrolling line, composed of:
Nr.1
Axial unroller, mod. SX210
Nr.1 Tangential roller, mod.
TC4Z-210
M12 \813609
1 NESI & PUGI
Cutting-Sewing machine mod.TC/14L yoc 2004, w.width max 1850 mm.,
380 Volts.
M12 \817104
1 TEXMA single
sewing machine, mod. T-TB-S, yoc 2002, tubular unfolding
M13 \815629
1
SPEROTTO Continuous decatizing machine mod.MULTIDECAT yoc 1989, with
Bianco weftstraightener yoc 1989 and brusher.
M13 \816870
1
SPEROTTO RIMAR MULTIDECAT Continuous decatizing machine yoc 1987,
width 1600 mm., with Mahlo pins weftstraightener.
M13 \816871
1
SPEROTTO RIMAR MULTIDECAT 2 Continuous decatizing machine yoc 1988,
with MAHLO pins weftstraightener
M14 \817431
1
BIELLA SHRUNK PROCESS Decatizing machine mod. KD MINIMAT H.Q. 1040,
yoc 1987
M14 \815628
1
BISIO Discontinuous decatizing machine
M14 \815710
1
BISIO Discontinuous Decatizing machine yoc 1985 about, widht 1800
mm., 300 m. fabric.
M14 \815922
1
BISIO Discontinuous Decatizing machine yoc 1995, width 1900 mm.,
satin 450 m.
M14 \807247
1
M-TEC Discontinuous decatizing machine in autoclave KD mod.DECOCLAV
10 CL yoc 1996, satin width 1700 mm., decatizing cylinder dia.900
mm., winding max dia.1700 mm., capacity 600 mt., winding speed 120
m./min., production 1200-1500 m./hour.
M14 \815608
1
TMT KD Decatizing machine in autoclave mod.PF-1203 MEDIUM yoc 1992,
width 2000 mm., with electric panel and drivers yoc 2008.
M14 \817278
1
TMT KD Decatizing machine mod.PF 2000 yoc 1996/97, autoclave
dia.1500 mm., winding dia.1200 mm., max fabric capacity 1000 m.,
beam dia.450 mm.
M16
\815144
Rolling - measuring - spyglass
MACHINE
-manufacturer :
LAZZATI - Legnano
-type– machine
model Lafra 2 CC/IB
-complete with
packaging machine with
PVC, - semi-automatic
-year of
manufacture
2000
-height of cylinders table 3400 mm
-useable work
height up to 3200 mm
-production in linear
metres 3000 metres/hour
More details on
request.
M16 \816625
1
TESSILMECCANICA Doubling and rolling machine mod. DRP/05 yoc 2001,
table width 4000 mm., unrolling device for big rolls in input,
delivery roll.
M17 \815143
LAYING
MACHINE for
folding and laying operations
-manufacturer - LAZZATI - Legnano (Milano)
-type–
model Lafra 200 TDD
-year of
manufacture 1994,
-table height cm 360
-useable work
height, open status,
340 cm
-useable height of the machine for doubled textile 180
cm
More details on request.
M17 \817395
1
MONTI Doubling machine yoc 2002, table width 2200 mm., with
sewing.
M18 \816235
1
NOVOPAC Packaging machine mod.AND 260 KLU 070 yoc 2000.
M18 \816264
1
NOVOPAC Packing/Rolling machine with polyethylene films mod. AND 260
+ GSL 070/2 yoc 2001.
M19 \807609
1
BIANCALANI Sueding machine, mod. PETRA, yoc 1997, w. width 1800 mm., input
folding or rolling up system, delivery rolling up system.
M19 \815853
1
LAFER Sueding machine, type GSI 224-1800, yoc 2000, w. width 1900
mm., 2 drums 24+24 cylinders, double brushing system with 1 brush on
the back, 1 additional air jet brushing system, inverter,
aspiration.
M19 \816995
1
SPEROTTO RIMAR Sueding and Carbon Brushes machine mod.SM6 yoc 1989,
w.width 1900 mm., 6 carbon brushes.
M19 \817338
1
VERSATOUCH Sueding
machine ( also brushing machine), yoc 2008, width 1800 mm., 3 rolls,
machine worked only 6 weeks,
machine equipped with diamond emery rolls and can be update
with carbon or ceramic brushes.
M20 \807919
1
Coagulation line yoc 2001, width 1800 mm., composed of:
-1
Coagulation head.
-Coagulation vat 6.000 liters.
-8 washing
vats of 3000-4000 liters, each vat with squeezing padder + 2
supplementary washing vats.
-Delivery big rolls.
Machine used
to coagulate solvents on fabrics for clothes (lining).
To this
installation it is possible to add:
1 small stenter frame heated
by independent boiler with themo-oil
M20 \815668
1
COLOMBO Line of Coating PVC and plastic materials &
Embossing yoc 2004,
fabric width 1800 mm., composed of:
-LA MECCANICA Introduction
non-stop.
-Pre-heating at infrared
-Cylinders heated by
thermo-oil, chilly cooling
-rolling up system in
output.
M20 \816800
2 MATEX coating
lines, 3 blades
M20 \816801
1
Coating Line, yoc 1985, table width 1800 mm., 2 blades, composed of
various machines:
MATEX
ISOTEX
METALMECCANICA
M20 \817019
1
Complete Coating line composed of:
entry unrolling device,
stitching machine, accumulator, with BETA padder, coating head,
oven, MATEX unit, BABCOCK Stenter, gas heated, year 2001, pin chain,
w.w.1800 mm., 6 chambers, cooling system, accumulator and exit
rolling device.
M20 \817384
1 Coating
Line w.width 1550-1600 mm., cylinders 1800 mm.
More details on
request
M20 \817446
1
MATEX coating line, 3 blades
M23 \815728
1
CORINO Rolling up machine for big rolls, yoc 2007, table width 2000
mm., w.width 1800 mm.
M23 \816212
1
DETTORI Rolling machine mod.SK100M, yoc 1999, table width 2000 mm.,
complet with LABELTEX labelling machine.
M23
\808864
13 FERBER Rolling machines of which: (6)
mod.ES62; (1) mod.ES63; (6) mod.ES64; yoc 1995-96, width 3400
mm.
M23 \816853
2
NEVENHAUSER External Rolling machines, roll max width 2600 mm., with
inspecting system, roll doffer.
M23
\816854
2 Rolling up machines for looms width 2500
mm.
M23 \817557
1 TESCO Rolling machine,
type TESTA ARRO 2200, yoc 1997
M25 \815618
1
OSTHOFF Cloth singeing line yoc 1996 about, table width 2000
mm., w.width 1800 mm.,
composed of:
Dogal Centering device and Bianco widener.
Double
brusher.
OSTHOFF Cloth singeing machine mod.PK 94.
Master
double mixer.
Steaming section and folding.
M25 \816194
1
OSTHOFF singeing machine, mod. 168, yoc 1994, for denim, table width
2000 mm., w. width 1900 mm., 2 burners reconditioned in 2008, 2
brushing groups, delivery big roll, without vat, speed 30
m./minute.
1 PAGANINI Sanforizing machine, yoc 1985,
reconditioned in 2000, for denim, table width 2000 mm., w. width
1900 mm., speed 30 m./minute, composed of:
-J-box.
-1 BETA
Padder, reconditioned in 2008, 3 cylinders, 2 vats.
-Bianco
electronic weftstraightener, yoc 2002.
-Denim device.
-Dryer,
yoc 2000, 8 cylinders (tot.16), 2 columns, steam heating.
-1
Small expander stenter length 1300 mm.
-1 Felt calender with
cooling cylinder
-1 Palmer diam. 2000 mm.
-Rolling up system
in output.
M27 \815206
1
BETA Padder yoc 1970, table width 2350 mm.,w.width 2100 mm., 3
rubber cylinders dia.280 about (refurbished in 2008), 2 vats, double
squeezing.
Machine was processing knitting fabric (water, 1st
squeezing, softening, 2nd squeezing).
M27 \816048
1
BETA Finishing padder type FLC.3 yoc 2003, table width 2400 mm., 3
cylinders, middle cylinder in chrome steel, prepared for knitting
fabric (widening cylinder).
M27 \816623
1
BETA Padder yoc 1980 about, width 3200 mm., w.width 2800 mm., 3
cylinders (1 rubber dia.300 mm., 1 hard rubber/ebanite dia.140 mm.,
1 rubber dia.300 mm.), 1 vat only.
M27
\816624
1 BETA Impregnation and squeezing padder yoc
1993 about, table width 2400 mm., w.width 2200mm., 3 cylinders (n.1
rubber dia.300 mm., 1 stainless steel dia.140 mm., 1 rubber dia.300
mm.), double impregnation bowl ; entering device ; expanding rollers
; exit on big roll ; C/C geared motor ; electric and pneumatic
panel.
M27 \817117
1 BETA Foulard, yoc
1982, w. width 1200 mm., 3 ciylindres, tubular squeezer
M27 \817511
1
BETA Impregnation padder, table width 2400 mm., w.width 2200mm., 3
cylinders (n.1 rubber dia.320 mm., 1 steel dia.160 mm., 1 rubber
dia.320 mm.), bowl at double impregnation, inverter, electric and
pneumatic panel, 380 Volts/50 Hz.
Machine mechanically and
electrically reconditioned.
M27 \816548
1
CABER Padder for tubular knitting fabric, yoc 1987.
M27 \813439
1
CABERTEX Padder for knitting fabric yoc 2000, AIRBALOON.
M28 \816708
1
Hot-flue machine, width 2000 mm.,
- KUSTERS, yoc 2000
-
delivery BABCOCK, yoc 1999
- metal detector, yoc 2002
M29 \815783
1
REGGIANI Flat printing machine mod.HS 320/20/8 yoc 1971, width 3200
mm., 8 colours, double dryer 3 compartments, 1 rotary head, 1
coating head.
M29 \817416
1
REGGIANI Manomacchina Printing machine mod.REMBRAND AVANT yoc 1990
about, w.width 1800 mm., 14 colours, gas dryer 4 compartments,
electric input, printing level 28 m., relax introduction.
M30 \817574
1
PRIMEC Coating rotary printing machine yoc 2005, for thermoplastic
resins, w.width 1650 mm., rollers width 1800 mm., 1 head, 1 colour, with belt
Dryer, gas heating.
M30 \814658
1
REGGIANI Rotary printing machine mod.RENOIR FUTURA, 6 colours, width
1900 mm., printing working width 1850 mm., dryer at gas
heating.
M30 \814659
1
REGGIANI Rotary printing machine mod.RENOIR FUTURA, reconditioned on
2003, 9 colours, width 1900 mm., printing working width 1850 mm.,
dryer at gas heating.
M30 \815108
1
ROTARY MACHINE for serigraphic printing of
textiles
-manufacturer
REGGIANI
MACCHINE
-type– model “UNICA ” - 240 / 23 --- 320 / 15 /
12
-magnetic,
automatic,
computerised
- “multidrive” actuation - digital
-number of
installable colours
15
-number of installed colours 12
-year of
manufacture
2001,
-useable printing height from 100 mm to 3200 mm
More details on
request.
M30 \817415
1
REGGIANI Rotary printing machine mod. RENOIR FUTURA, yoc 1990,
w.width 1800 mm., 10 colours, gas dryer 3x2, steam input, relax
introduction, dust suction, ratio from 640, 914, 1018, colour sensor
updated in electronic, 1 blade washer, 1 screen washer.
M30 \817420
1
ZIMMER Rotary single head printing machine mod.MIDI UR13 yoc 2000,
reconditioned 2008, 15 m., w.width 1800 mm., with blade washer and
screen washer.
M31 \817418
2
Manual printing tables yoc 2008, 9 m., width 1800 mm., with electric
heated printing table.
M31 \817419
1
GALI Printing table mod.LXE
yoc 1985, reconditioned 2008, printing table 35 m., w.width
1800 mm., electric heated, with trolley for table cleaning.
M32 \813648
1
MECATEX Transfer printing machine mod.TS/1800/900, yoc 1997, fabric
w. width 1900 mm., composed of:
input with J-Box, brushing
device, expander stenter, transfer calender, J-Box, delivery MTG
rolling up machine type AR-340 yoc 1995.
M33
\815140
MACHINE FOR WASHING THE RACLES of the rotary
machine
-manufacturer :
COLOMBO - Como
-type– model LVR 530
-year of
manufacture
2000
-automatic machine, with programmer,
-entirely made of
stainless steel
AISI 304,
-complete with trolley
for positioning the racles
More details on
request
M33
\815141
MACHINE FOR WASHING THE CYLINDERS of the
rotary
-manufacturer :
Colombo - Como
-type– model SWM 3500 4/P
-year of
manufacture
2000
-automatic machine, with PLC
programming
-washing with 4 positions
-entirely made of
stainless steel
AISI 304
More
details on request
M35
\816704
COMET Raising line, composed of:
10 COMET Raising
machines, mod. CIGNUS,
2 Shearing machines
w. width 1.800
mm.
yoc 1989
M35 \815778
1
COMET Double Raising machine, type PEGASO X6, yoc 1997, width 2000
mm.
M35 \812662
1
CROSTA Raising machine mod.MC-30 yoc 1980 about, width 2200 mm., 1
drum with 30 cylinders, wideners for knitting fabric.
M35 \815759
1
CROSTA Raising and shearing line, mod.MC10/36, SSC/A, yoc 2005,
width 1800 mm., composed of:
5 Raising machines
3 Shearing
machine.
M35 \816482
2
CROSTA Raising machines for knitting fabric yoc 1999/2000, width 2000
mm.
M35
\816705
CROSTA Raising line, composed of:
*CROSTA GT
unrolling machine, inverter
*8 CROSTA MC50 raising machines, yoc
1979-1980, inverter
*2 LAMPERTI GA/L90 raising machines, yoc
1990, inverter
*1 CROSTA CTU/L shearing machine, yoc 1977,
inverter
*1 LAMPERTI C/L90 shearing machine, yoc 1980,
inverter
w. width 3.200 mm.
M35
\816706
CROSTA Raising line
1 TESTA unrolling
machine
6 CROSTA MC50 raising machines, yoc 1977
3 CROSTA
CTU/L shearing machines, yoc 1977
7 "ballerini"Groups
1
rolling machine
w. width 3.400 mm
M35 \816937
1
CROSTA Raising machine mod.MC-10/36 yoc 2003, w. width 2400 mm., 1
drum 36 cylinders, electronic, suitable for open and tubular
knitting fabric
M35 \816635
1
LAFER Raising machine, mod. GRV-80 DUPLEX, yoc 1986, table width
2400 mm., w. width 2200 mm., 24+24 cylinders, suitable for open and
tubular knitting fabric, suction.
M35 \817078
1
LAFER Double raising machine mod.GRI 228 yoc 2008, w.width 2400 mm.,
filter suction system.
M35 \817158
1
LAFER Raising line, yoc 1996, w.width 2000 mm., composed of:
- 1
double raising machine, type GRI 90/24, double drum with 24 + 24
cylinders
- 1 simple raising machine, type GRI 90/36, 1 drum with
36 cylinders
- 1 EFFEDUE Suction plant, type SR32, yoc
1991
M35 \817160
1
LAFER Raising machine, type GRC 90 COMBI, yoc 1997, 2 drums
M35
\814555
*1 LAFER Raising machine mod.GRI-228 yoc 2007,
width 1800 mm., w.width 1700 mm., 2 drums 28 cylinders each drum,
fabric speed 8-45 m./1'.
*1 LAFER Raising machine mod.GRI-128 yoc
2007, width 1800 mm., w.width 1700 mm., 1 drum 28 cylinders, fabric
speed 8-45 m./1'.
M35
\816707
LAMPERTI Raising line, composed of:
1
Unrolling machine
2 LAMPERTI raising machines, Mod. GB/L86, yoc
1987, H = 3.400 mm., 30
cylindres,
2 CROSTA shearing machines, Mod. CMG, yoc 1978
1
rolling machine, H =
2.000 mm.
suction plant
w. width 1.800 mm.
M36 \817654
1
ZONCO Milling and washing machine mod. TWIN 800, yoc 1999, 4
independent channels (2+2). Bongossi cylinder.
M36 \817655
1
ZONCO Milling and washing machine mod.FLEXICOM 400 yoc 1993, 2
channels, Bongossi cylinder.
M36 \817155
1
MAT Milling machine, type 4 STAGIONI TURBO, yoc 1991, 2 ropes
M36 \817147
2
ROTORMAT (LINO) milling and washing machines, type 3C, yoc 2003, (1)
gas heating and (1) steam heating
M37 \816716
1
BABCOCK preparation and treatment plant for after-printing and
dyeing of shuttle/open-knitted/tubular fabrics, yoc 1990, w. width
max. 2200 mm., table width 2400 mm., fabric speed 8-80 m/min.,
production speed 50 m/ min.
More details on
request
M37 \816717
1
BABCOCK plant for preparation and continuous treatment, yoc 1988, w.
width max. 3400 mm., or 2x1600 mm., table width 3600 mm.
More
details on request
M37 \815616
1
BETA Continuous open width washing machine yoc 1980 about, width
2000 mm., 5 washing vats, 5 Beta squeezing cylinders.
M37 \815640
1
CIMI Open width washing range mod.LAVANOVA yoc 1993, table width
2000 mm., fabric width 1800 mm., 5 vats, 3 squeezing groups, widener
in input, delivery folding and rolling up system, no crabbing, for
wool and cotton.
M37 \816398
1
CIMI LAVANOVA
Construction year 1993, workshop reconditioned in
2000 by CIMI
Table height 2000 mm, working height 1800
mm.
Fabric feeding assembly from plaiting device
More details
on request
M37 \815643
1
FAMIT Soda machine yoc 2000, working width 2000 mm., with tank for
preparation, suitable for soda.
M37 \814210
1
INTES/TEXCEL Continuous washing machine yoc 1995/97, table width
2000 mm., 7 vats, inox, from roll to roll, composed of:
*1st vat
INTES with Padder INTES.
*2nd vat TEXCEL VL15RS yoc 1997, with
Padder TEXCEL.
*3-4-5-6-7th vats INTES with Padder
INTES.
*Steam Dryer at 8 cylinders.
Suitable for weft/warp
cotton fabric up to 500-600 grs./m.
M37 \815606
1
KUSTERS Open-width wasing machine, width 2000 mm., 5 vats.
M37 \815620
1
HTP UNITEX Continuous washing machine high pressure, mod.ESSETEX HWT
yoc 2002, table width 2400 mm., w.width 2200 mm., 1 vat.
M37
\817092
1 MAT Open width washing range mod.VIBRO yoc
1994, w.width 2000 mm., 4 vats.
M37
\816712
MEZZERA continuous open width washing range,
with RAMALLUMIN dryer, w. width 3.600 mm., yoc 2000, composed
of:
*MEZZERA washing range, double entry, 3 ACTIVIA vats, 2 Squeezing
systems, delivery group with pneumatic padder 10 tons; roller for
big rolls; complete motorization of the line with engine group,
control panel, synoptic panel.
*RAMALLUMIN dryer, 16 drying
cylinders (8 cylinder for each part of the fabric)
M37 \817049
1
MEZZERA washing machine, type VB, yoc 1980 abt., table width 1900
mm., with sticks.
M38 \817143
1
MAT washing machine, type SUPERVELOX DRY, yoc 1989, w. width 1800
mm.
M40 \816490
1
SPEROTTO Solvent scouring and carbonizing line, mod.NOVA CARBOSOL
220/450/1000 yoc 1993, table width 2200 mm., w.width 2000
mm.
More details on request
M40 \816613
3
TTF Washing machines for dry-cleaning with solvent mod.MAMMOTH 1500
yoc 1997, 40 kgs. each
1 TTF Distiller mod.DSC 2500 yoc 1997
1
TTF Recovery machine mod.E300T yoc 1997.
M41 \813718
1
GOLLER PAD-STEAM or washing Unit, yoc 1984/1995, table width 2000
mm., w.width 1800 mm., with KUSTER Padder type 222.11.1800 yoc 1984,
7 washing vats with Padder.
More details on
request
M41 \814209
1
OMEZ Continuous bleaching machine yoc 1970, width 2000 mm., 6 vats,
with steamer.
M41 \814213
1
TEXCELL Continuous Bleaching machine yoc 1999, width 2000 mm., 6
vats, 12 dryeing cylinders, steam heating, 600 grs./m., with
steamer.
M41
\815106
WASHING MACHINE - bleaching
-manufacturer
TEXCEL
ITALIA - Dalmine - Bergamo
-type– machine
model “LL
137990”
-year of manufacture 1998
-table width 3400 mm
-useable working width
3200 mm
-linear
metre production per hour 5.000 linear metres
More
details on request
M44 \811150
1
CABER Mercerising machine for tubolar fabric yoc 1991, w.width 1100
mm.
M44 \815265
1
MECCANOTESSILE /CABER/OTHERS Mercerising machine for continuous open
knitting fabric, yoc 1985/88 about, CABER soda vat, with table
cylinder width 2400 mm., w.width 2200 mm., 5 washing vats with
carpet River to reduce tension, delivery folding system.
M45 \815207
1
BIANCO Detwister mod.AIR SLIT yoc 1995, table 2400x2200 mm.,
detwister, tubular cut, plaiter delivery, stainless
steel.
M45 \815610
1 Detwister Line
composed of:
BIANCO Wideners and centering device.
BIANCO
Detwister.
BETA Padder.
M45 \815611
1
Detwister Line composed of:
BIANCO Wideners and centering
device.
BIANCO Detwister.
BETA Padder.
M45 \815621
1
Detwister Line, width 1800/2000 mm., composed of:
BIANCO Wideners
and centering device.
BIANCO Detwister.
BETA Padder.
M45 \816238
1
BIANCO Detwister mod.COMPACT MR yoc 1993, table width 2000 mm., with
widener, beater, unwinder, motorized wheel, centring unit, plaiter.
For knitting and fabric.
M45 \816626
1
BIANCO Detwister line yoc 1999, table width 2400 mm., complete
of:
-Cutting machine for tubular
-squeezing group J-box (fully
in stainless steel)
-folding group.
M45 \816641
1
BIANCO Rope Opener yoc 1989, width 2000 mm., with painted stainless
steel frame, cutting device, with squeezer.
M45 \817114
1
BIANCO tubular squeezing detwister, yoc 1999
M45 \817144
1
BIANCO Detwister, yoc 1994, w.width 2000 mm., with J-BOX, stainless
steel squeezer, for wet material.
M45 \817145
1
CORINO Detwister, yoc 2003, w.width 2200 mm., with J-BOX, stainless
steel squeezer, for wet material.
M45 \815593
1
CORINO Detwister mod.EKS 2504 yoc 1991, automatic, for knitting
fabric, w.width 2400 mm., folding delivery, with cutting device for
tubular.
M45 \817146
1
GROV GUIDO REGIS Detwister, yoc 1994, w.width 2000 mm.
M46 \814216
1
CORINO Rope Opener reconditioned yoc 2003, width 1800 mm., green
colour, not inox, with widener, delivery tangential roll with
pressor.
For weft/warp fabric (no knitting)
M48
\815142
POLYMERISING MACHINE for fixing the colour of the
textile
-manufacturer : SALVADE’ - Como
-type - model AFL with free lap
-length of
the chamber 10 metres
-textile content 240 linear
metres
-height of cylinders table 3500 mm
-useable work height
3200 mm
More details on request
M49 \815627
1
F.BECHERINI & C. Calender mod.CLD-200 yoc 1992, with Bianco
weftstraightener and brusher.
M50 \817351
1
CIATTI Expander Stenter yoc 1992, table width 2600 mm., w.width 2400
mm.
M51 \815786
1
BABCOCK Stenter frame yoc 1991, reconditioned on 2002, width 2200
mm., 6 compartments, pins and clips chaine, gas heating, with Corino
weftstraightener, without Padder.
M51 \807334
1
BRUCKNER Stenter frame yoc 1980, w.width 1800 mm., 3 compartments,
for knitting fabric, steam heating, pins chain, with MAHLO
weftstraightener at 4 heads, without padder.
M51 \815607
1
BRUCKNER Stenter frame, 1998, max width 2000 mm., input field lenght
65 m., pins chain, gas heating 8+8=16 burners, suitable for knitting
fabric.
More details on request
M51 \815612
1
CIATTI Stenter frame yoc 1994/95, w.width 1800 mm., 8 compartments,
pins chain, gas heating 8 burners, complete of:
Dogal Centering
device with BIANCO wideners.
BETA Padder.
MAHLO
Weftstraightener mod.RFMC-944
Folding and batcher
delivery.
M51 \812408
1
KRANTZ Stenter frame yoc 1985/86, table width 2400 mm., w.width 2200
mm., 6 compartments, vertical pins chain, gas heating, without
Padder, without weftstraightener.
M51 \816688
1
SANTA LUCIA Stenter frame yoc 2000, dyathermic oil, 2 compartments,
padder.
M52 \812801
1
ALEA MULTYLAYER Vertical Stenter, width 2.400 mm., yoc 1991,
11 horizontal passages for 70 m. fabric content in the heating
chamber, gas heating, 4 temperature controllers (4 heating zones), 6
m. horizontal diverging entry with overfeeding, edge sizing and
slitting, suitable for knitting fabric, entry with
enlarging-centering device, 1 BETA padder 3 cylinder, MAHLO 4 heads
automatic weftstraightener, air cooling at exit, entry and exit on
opposite sides of machine and both with no-stop units for big roll
and folds.
M52 \817047
1
BABCOCK vertical stenter, type 5012, yoc 1992, 8 chambers, pins
chain, gas, with BETA padder - table 1800 mm., no weftstraightener,
possibility to use for knitting.
M52 \817084
1
KRANTZ Multi-tier stenter frame mod.KM 16 yoc 1997, w.width 2000
mm., 5 compartments, pins/clips chain, gas heating double burner,
BIANCO Padder yoc 1997, + heads; BIANCO weftstraightener yoc
1997.
M52 \814016
1
SANTA LUCIA Tier Stenter mod.WHITE 8.200.GAS yoc 1995, width 2000
mm., 8 ways, pins chain, gas heating 8 burners, MAHLO Optical
weftstraightener mod.RFMC 944, with BETA padder table width 2000
mm., w.width 1800 mm., delivery folding or batcher.
M53 \817445
1
CORINO optical weftstraighter, type MK-2-MG4, yoc 2001, table width
2200 mm., w. width 1800 mm., working speed 30 – 40 mt/min.
M53 \817507
1
BIANCO weft straightener, yoc 1990, width 2500 mm., with gas boiler
for steam (110°C)
M54 \816195
1
PAGANINI Sanforizing machine yoc 1985, reconditioned 2000, for
denim, table width 2000 mm., w.width 1900 mm., speed 30 m./minute,
composed of:
-J-box.
-1 BETA Padder reconditioned 2008, 3
cylinders, 2 vats.
-Bianco electronic weftstraightener yoc
2002.
-Denim device.
-Dryer yoc 2000, 8 cylinders (tot.16), 2
columns, steam heating.
-1 Small expander stenter length 1300
mm.
-1 Pallet
-1 Palmer dia.2000 mm.
-Rolling up system in
output.
1 OSTHOFF singeing machine mod.168, yoc 1994, for denim,
table width 2000 mm., w.width 1900 mm., 2 burners reconditioned in
2008, 2 brushing groups, delivery big roll, without vat, speed 30
m./minute.
M54 \815622
1
CORINO Sanforizing machine yoc 1990 about, width 2000 mm., complete
of:
Dogal centering device and Corino widener.
Steaming
section.
Expander stenter
Rollemar shrinking
group.
Monforts dryeing section.
M54 \816695
1
CIBITEX Sanforizing line, yoc 1991, w.width 1940 mm., d.c. motors,
max working speed 50 m/minute.
More details on request.
M55
\815107
DRYER WITH CYLINDERS
-manufacturer TEXCEL ITALIA - Dalmine - Bergamo
-type– model PC 011180
-year of
manufacture
1998
-stainless steel baring structure, with two drying cylinder
columns made of steel
covered with teflon
-height
of drying cylinder table 3400 mm
-useable work
height 3200 mm
More details on
request
M56 \816320
1
ALEA dryer, yoc 1994, table width 2500 mm., 4 chambers, Kevler belt,
gas heating.
M56 \817325
1
SALVADE' Dryer mod.APD yoc 1994, cylinders width 2200 mm., w.width
2000 mm., 2 burners, max speed 40 m./1'.
M57
\815779
1 COMET Double Shearing machine, APELLE 11, yoc
1997
M57 \816526
2 COMET Shearing
machines CUT 200 yoc 1980/81, table width 2000 mm., w.width 1800
mm.
M57 \814728
2
COMET ORION Shearing machines yoc 1997, width 2000 mm.
Machines
in line, suitable for knitting fabric, without aspiration.
M57 \811459
1
CROSTA shearing & ruffling machine mod.SSC/A yoc 1998, w.width
2000 mm., 1 knife, with brushing group, folding input/output,
independent suction device.
M57 \817505
2
CROSTA Shearing machines, yoc 1963, table width 1800 mm., w. width
1700 mm., 2 knives
M57 \817079
1
LAFER Shearing machine mod.CMI 100 yoc 2008, w.width 2200 mm.,
filter suction system, with metal detector.
M57
\817156
2 LAFER vertical double shearing machines, mod.
CMI 2S, yoc 1998, w.width 1900 mm., 4 knives in total, inverter,
Banco Torres, no centralised suction
M57 \817162
1
LAFER horizontal shearing machine, yoc 1990, w.width 1800 mm., 5
heads, Banco Torres
M57 \815625
1
LAFER Shearing machine mod.CMB-2
M57
\815626
1 Shearing Line composed of:
2 LAMPERTI
Shearing machines mod.C/L 80 yoc 1981, width 1400 mm.
M57 \816527
1
LAMPERTI Shearing machine, yoc 1979, table width 2600 mm., w.width
2400 mm.
M57 \815624
1
Shearing group 1988, composed of:
1 LAMPERTI Shearing machine
mod.C/L85 2C, double drum.
1 LAMPERTI Shearing machine mod.C/L81,
single drum.
M57 \816839
1
VOLLENWEIDER Shearing machine mod.SUPER DUPLO yoc 1989, 2
groups.
M57 \817547
1
Complete autom. Inspecting and Shearing Line VOLLENWEIDER SUPER
DUPLO X CC 3600
with EVS, yoc 2004,
width 3600 mm.
M57 \817548
1
Complete Inspecting and Shearing line VOLLENWEIDER SUPER DUPLO X CC
2600 with EVS, yoc 2004, width 2600
mm.
M58 \815326
1
ARIOLI Laboratory Steamer type LABO, HT standard, with padder, yoc
1989, w.width 600 mm., electric overheater 15 kw.
1 ARIOLI
Laboratory Steamer for saturated steam yoc 1989, for knitting
fabric.
M58 \815630
1
COMAR Steaming machine mod.VAPORSPEED VL-C yoc 1999 belt width 2.200
mm
M58 \817324
1
SALVADE' Continuous Steamer mod.VDX yoc 1994, two-phase, w.width
2000 mm., capacity 90 mt., widener/centering device in input, max
speed 55 m./1', oil heating.
M58 \817410
1
SALVADE' double lap steamer, yoc 1992, overhauled in 2009, w.width
3600 mm. (1500x2), capacity
202 m each
lap, HT 175°C, gas
heating
M58 \815055
1
SALVADE' Steamer mod.MICROVAP 30 HU yoc 2007, table width 2200 mm.,
w.width 1800 mm., fabric capacity 30-40 m., steam heating + methane
gas burner.
M58 \815631
1
SPEROTTO Steamer mod.SG/ZERO M yoc 1992. belt widt 1800 mm
M58 \815637
1
SPEROTTO RIMAR Steamer mod.STABILA yoc 1996.
M59 \816324
2
EMIT Inspecting machines, yoc 2005, with all programs and EDP,
w.width 1900 mm.
M59 \816305
1
OEMA inspecting machine,work. width 1900 mm., delivery roll
1
EMIT inspecting machine, yoc 1992, table width 2500 mm.,
delivery roll
1 Inspecting machine, table width 3650 mm.,
delivery roll
M59 \816723
1
EVS Line for fabric inspection, yoc1997, width 1800 mm.
M59 \817538
6
FERBER Inspecting tables, of which:
- 5 table, width 2300
mm.
- 1 table, width 3900 mm.
M59 \814547
1
OFFRI Inspection machine, width 2000 mm., with rolling up
system.
M59
\816721
LA MECCANICA Inspecting machine, type LM 83, yoc
2005, feeding roll max. diam. 1500 mm., big roll max weight 1000 –
2000 KG., useful width 5200 /5400 mm., cylinders 5400 /5600 mm.,
rolled up roll diam. min. 150 – max. 1200 mm., rolled up roll weight
max. 80 – 100 kg., double engine, light table, electronic
countermeter, motorized packaging system
M59
\816515
PLM Inspection and Winding up plant for fabric
and non-woven mod.ROTRON yoc 1994, autom. packing, max speed 80
ml/min., max dia. exit rolls 120 cms, with weighing system in
output, 2 autom. centering devices, 11 blades,
cutting-sewing.
M62 \817490
1
FERBER Paletising machine, with selvedges guiding system, yoc
2004/5
input 4000 mm doubling and palletizing 1200 mm height
1
FERBER Paletising machine, yoc 2004/5
input 4000 mm doubling and
paletizing 1200 mm height
M62 \816647
1
LAZZATI Doubling/Paletising machine yoc 1986, input width 3100 mm.,
delivery width 2000 mm.
M62
\816713
LAZZATI Plaiting machine:
2 Lazzati
inspecting machines, type LAFRA IA/2CC, yoc 1990
1 Lazzati
plaiting, type LAFRA 200/100, yoc 1990
Rolling-up
device
Brushing device
Extractor fans
M67 \817214
1
ANGLADA TURBANG type MULTISTRIKE TMS SIMPLEX Drying and Finishing
machine yoc 2000, table width 2000 mm., w.width 1800 mm., gas,
nominal thermic power 250 kw., nominal eletric power 40 kw, 1
section double internal way, speed 15/20 m./1'.
More details on
request
M67 \815613
1
BIANCALANI AIRO 24 FULL OPTIONAL yoc 2006, Softening & drying
machine, table width 2000 mm., with Padder.
M67 \815617
1
COMINTEX TRIPLEX Turbang yoc 1993, width 2000 mm., 3 compartments,
with 4 Dogal centering devices and Corino wideners.
M67 \817043
1
COM.IN.TEX Turbang, type SIMPLEX yoc 1993, width 1900 mm., 1
compartment
M67 \817183
1
MCS TURBANG GPL yoc 1985, fully reconditioned in 2000, table width
2000 mm., w.width 1950 mm.
M99 \815780
1
BIZMAK Crash machine
type 4041, yoc 2004, width 1400 mm.
M99 \816549
1
SPEROTTO RPM Cloth turning machine yoc 1981.
Last update 24 May 2011
